Examples of using Thermostatic head in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
Thermostatic head K without accessories.
Value at the bearing surface thermostatic head or actuator.
Thermostatic head intended to regulate the flow through the RV2 radiator valves.
Spindle extension for RTL thermostatic head with Multibox RTL.
The valve also goes into energy-saving mode if the temperature at the thermostatic head drops.
The valve is regulated with a thermostatic head, thermal actuator or handwheel.
If the thermostatic head is removed, the valve shuts down to a nominal value(kv 0.05) and the.
In the way valve to install a thermostatic head with a remote sensor type.
TOV can be controlled with electric actuators as well as in some applications with a thermostatic head.
our first thermostatic head with a liquid-filled sensor.
If the preset kv is greater than 0,05 the temperature in the room will then be lower if the thermostatic head is removed.
Spindle extension for K thermostatic head with Multibox 4 K-RTL when maximum installation depth exceeded.
when the thermostatic head is fully closed.
Replacing old thermostatic heads(1988 or before) with modern ones, can achieve energy savings of up to.
when the thermostatic head is fully closed.
If the thermostatic head is removed, the valve shuts down to a nominal value(kv 0,05)
Regulation is made valve that is installed in the supply reservoir and thermostatic head that has a remote immersion sensor.
Replacing old thermostatic heads(1988 or before) with modern ones, can achieve energy savings of up to 7%.
Including radiators with IMI Heimeier thermostatic insert presetting and thermostatic head, with 50% radiator share.
Exception: The thermostatic head WK is designed only for mounting on thermostatic inserts with an M30x1.5 threaded connection.
be used as shut-off, and also during adjustment to set nominal opening with thermostatic head mounted.
The thermostatic head Halo is used to control the temperature of individual rooms using,
Adapters for pressure independent control valves Adapter kit for adapting actuators of other brands to Regin's valves TH-RV468, Thermostatic head for RV2 valves.
Replacing old-style thermostatic heads(those produced before 1988) with modern versions can achieve up to 7% energy savings.
The protective cap can be used to close the valve during the construction phase. It can also be used when balancing the system to achieve nominal head with a thermostatic head fitted.
The thermostatic head Halo is used to control the temperature of individual rooms using, for example,
Also for thermostatic valve bodies V-exakt to end of 2011/F-exakt, thermostatic head B(temperature setting),
The thermostatic head Halo is used to control the temperature of individual rooms using, for example, heaters, convectors, and radiators.
of the floor heating by means of one thermostatic head.
The set value is displayed in a window on the thermostatic head. The standard temperature range is 0-28°C, but can be delivered with maximum limitation or minimum limited setting from the factory.