Examples of using Derating in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
No derating up to 125ºC ambient.
Max. operating altitude without derating.
Derating for temperature 40 deg C.
Altitude Up to 2000m without power derating.
No derating up to 85 degree ambient temperature.
Oprating attitude 1000 m max without derating.
Derating current for over high ambient temperature.
Please check the derating curve for more details.
Derating current for over high ambient temperature.
A: Resistive load rating: usually derating 75% of rated capacity.
No derating up to 85 degree ambient temperature.
When on complete appliacne packaging and needed high reliability, please consider derating design.
Derating current for over high ambient temperature.
Motor load rating: Normally the derating is 20% of the rated load, and it needs to adopt a circuit that.
Derating may be needed under low input voltages.
But in order to optimize and improve the reliability of the letter patience, we need to use the actual use of derating.
Inductive load rating: usually derating 40% of the rated load, and it needs to use an arc suppression of the absorption circuit.
C: Inductive load rating: usually derating 40% of the rated load, and it needs to use an arc suppression of the absorption circuit.
E: Tungsten lamp load rating: usually derating 10% of the rated load, and it needs a series of resistance to reduce the impact current.
Larger voltage ratings, smaller derating, and higher ripple current ratings are among its benefits compared to tantalum caps.
D: Motor load rating: Normally the derating is 20% of the rated load, and it needs to adopt a circuit that suppresses the impulse current and the arc is also required.
MOSO Intelligent innovator UFO shape led power has the led driver industry' s unique derating over temperature protection circuit, which can make the light power supply not easy suddenly happen the phenomenon of over- temperature and shutdown even under the harsh working environment, so as to ensure continuous illumination.
For capacitive load, derate current by 20.
For capacitive load, derate current by 20.
I don't know by how much these must be derated though.
Above 85℃, please use derated voltage as working voltage.
You must then assign the rating(already derated if necessary according to ambient temperatuer) a downrating factor of 0.8.
You do need to limit power put in them, but if you derate voltage enough they have a very high current capacity.
Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20.
The advantages of fitting the system is the engine will not derate and also will not display any warnings on the dash due to adblue faults, no power reduction.
