Examples of using Heating surface in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Tail heating surface temperature acid corrosion tendency.
Developed as removing apparatus of fixed dust on the heating surface of boiler.
Silicone Flexible Heating Surface Heater Manufacturer.
In the curing cycle it has excellent seal, andvery easy to remove from the cold or heating surface after the curing.
Peeling of fixed dust on the heating surface of boiler, power saving in maintenance management.
Heating surface tubes and headers with privildged connection structure, reducing mechanical shock and vibration.
Adopt the latest type of furnace, large heating surface, improve boiler efficiency.
The heating surface of the economizer is much cheaper than that of the evaporating heating surface.
The rear part is convective flushing heating surface, which is composed of a serpentine bundle.
The heating surface is arranged reasonably, the area is large, the heat transfer effect is good, the efficiency is high, and the output is stable and sufficient.
The heat is transferred to the convection heating surface through the diverting chamber;
An evaporative heating surface composed of many parallel pipes is arranged on the inner wall of the boiler furnace.
Corrugated furnace design is adapted to expand the furnace and increase the heating surface to improve thermal efficiency.
It is the main type of evaporative heating surface of modern boiler and also the basic part of water circulation loop of boiler.
Fire Tube Steam Boiler not only improves the heat absorption intensity of the boiler but also meets the requirement of the heating surface of the boiler to be heated and expanded.
The coil type structure is adopted, and the heating surface is sufficient, and the thermal efficiency of the boiler is very high.
The climate reasons: the general winter temperature is low and the human skin dry, heat will be slower or less heat, this time only the heating surface can be used after wetting.
Construction and arrangement of heating surfaces is flexible as water can be supplied directly from the drum which is placed quite far away from heating surfaces.
The maximum limit reduces the heat loss, achieve the full absorption, therefore must guarantee each heating surface's clean, remove scale and ash in time to make the boiler run under high efficiency.
In the different area of the site can meet the requirements of different heating power and heating temperature requirements, according to the design requirements, to achieve the heating surface temperature distribution.
The front drum and both sides of the furnace water-wall tubes form radiant heating surface, the rear drum and the tube nest between the header form convection heating surface. .
Since the feed water is heated in the economizer before entering the steam drum, the heat absorption of the feed water on the heated surface is reduced, and the economizer can be used to replace the partially evaporated evaporating heating surface. .
The furnace adopts double-tight row of coils, and the heating surface is adequately arranged to reduce the heat load on the surface of the pipe, making the heat transfer oil safer to use.
At the same time, the biomass boiler produced by the company is equipped with an automatic cleaning device, which can remove the ash from the heating surface of the boiler in time to ensure efficient and stable operation of the boiler.
After the generated high temperature flue gas scours the main heating surface of the boiler, it enters the coal economizer and air preheater on the heating surface of the boiler tail, enters the dust collector, and finally is discharged into the atmosphere through the chimney.
After some heat of the combustion-generated high temperature fume is absorbed by the hearth, the fume flows to the convection heating surface through burn out chamber and exhausts outside through the chimney via coal economizer.
The material spreading system makes the material equally heated and far increases heating surface, accompanish with patent structure, that totally solved low heat transfer efficiency and coking that occurred in other technologies and equipments in the world.
Avoiding drum bag defects: the riser pipes of the two sides of the header are pulled toward the furnace, and the bottom of the drum is introduced below the bottom of the drum and the bottom of the drum covered with the heat insulating material constitutes the heating surface of the furnace top, and the bottom of the drum is successfully solved by the novel furnace structure.
The feed water is heated in the economizer before entering the evaporative heating surface to reduce the heat absorption of water in the evaporative heating surface, which is equivalent to replacing part of the evaporative heating surface with the economizer.
The heated surface adopts a close-packed disc tube, and the heated surface is arranged sufficiently to reduce the heat load on the surface of the tube, so that the heat transfer oil is safer to use.