Examples of using Raceway in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Revving Raceway Description.
June 7- 8 2014 Moscow Raceway.
Cable Raceway with Cover.
Phoenix international raceway map.
Raceway Plastic, for cable management.
Fully inspect raceway of turning parts;.
Q--Improved friction torque characteristics and raceway geometry.
Optimized raceway geometry and super finishing.
For installation exposed, or in raceway, wet or dry location.
Raceway formation and finishes to provide long life and loadcarrying capacity.
CL7A--Improved friction torque characteristics and raceway geometry.
The roller and raceway surface of Cylindrical Roller Bearing is line contact, so the bearing has.
Fluent strips can be installed in one raceway for a heavy cargo.
Bearing must be provided to ensure concentricity of the inner and outer raceway.
Accessing the electrical connection points in the raceway and removable self-trapping drain.
These are based on not exceeding a certain amount of plastic deformation in the raceway.
Exposed wiring in air or in raceway, wet or dry location and used for moblie electrical equipment.
The roller profile determines the stress distribution in the roller/raceway contact area.
Super finished raceway: special grinding to reduce noise, improve lubricant distribution and life.
The carrying capacity of axial load depends on the contact angle of raceway of outer rings.
It features a special cage design and raceway control so that it will operate in a clog contaminated condition.
Similar to the band saw machine, hand-held steel saw is used when cutting metal raceway and plastic pipe.
The raceway grooves on both the inner and outer rings have circular arcs of slightly larger radius than that of the balls.
Full Complement Needle Bearings F have a drawn outer shell that serves as a raceway for the maximum number of rollers.
Moscow Raceway, the promoter of the championship in Russia, was delighted to start this cooperation.
The Rolling-Element Bearing 22200 Series profile determines the stress distribution in the roller/raceway contact area.
The raceway grooves on both the inner and outer rings have circular arcs of slightly larger radius than that of the balls.
In order to prevent damaging sliding generated between the rollers and raceway, a minimum radial load must be acted on the bearing.
Conveying equipment do not have high speed requirement, however low speed means high requirement on rolling elements and raceway.
The logarithmic roller profile reduces edge stresses at the roller/raceway contact and sensitivity to misalignment and shaft deflection.