Examples of using Static load in English and their translations into Thai
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Static Load: Max 2 tons.
Bearings have static load ratings.
Static load ratings(kN): 53 kN.
Basic Static Load Rating.
Smooth to the road surface support static load 10 ton.
Rated static load: 120 N/mm.
High carrying capacity, maximum static load up to 210MPa;
Max. static load back 2400Pa.
Use only for static loads.
Basic static load rating: 1.66kN.
Bearing type Style d D Be Bi Dynamic load The static load.
Basic static load rating-Co 9.3kN.
The modular plastic tiles are not designed for a strong static load, so go through it on foot.
The static load test is 4 times of rated capacity.
Concrete Sleeper Static Load Tester R.
Basic static load rating, radial: 106000 N.
Any rapidly applied force that increases the load on the rope significantly above the normal static load or changes its properties when lifting or suspending a weight.
C0a Basic static load rating(see bearing dimension table) kN.
The bearing axis of thrust self-aligning Roller Bearing is permitted to be inclined, when the equivalent static load P0a≤0.05C0a, and when the shaft washer is slewing, the permissible tilt angle is.
Dry friction Static load 250 PV value limit Oil lubrication 2.8.
According to the requirements of the chemical industry and commerce association, the metal parts with oil and gas separation filter of the compressor has conductive connection, in order to reliably conducting static load.
Installed to withstand a static load in tension(for packet filtering and bags);
The high strength of the sliding contact surfaces makes these bearings especially suitable for bearing arrangements where heavy loads of alternating direction shock loads or heavy static loads have to be accommodated The surfaces are treated with….
This machine is designed to test the static load of adhesive tape, specified adhesive area, temperature and load. .
The surfaces are treated with molybdenum disulphide( MoS2) lubrication and a phosphate coating. Radial Spherical Plain Bearings GEWZ-ES series requiring maintenance( steel-on-steel) have hardened sliding contact surface on both rings. Bearings with this sliding contact surface combination require regular relubrication. They have both wear and corrosion resistant characteristics. The high strength of the sliding contact surfaces makes these bearings especially suitable for bearing arrangements where heavy loads of alternating direction, shock loads or heavy static loads have to be accommodated.
Master/slave motion control, completely static load balance and dynamic load balance in milliseconds can be implemented with flexible parameter interconnection.
The high strength of the sliding contact surfaces makes these bearings especially suitable for bearing arrangements where heavy loads of alternating direction shock loads or heavy static loads have to be accommodated The surfaces are treated with molybdenum disulphide MoS2 lubrication and a phosphate coating Bearings….
This term defines a static load such that, at the contacting position where the maximum stress is exercised, the sum of the permanent deformation of the rolling elements and that of the rolling plane is 0.0001 time of the diameter of the rolling elements.
When tested node steering bikes for preschoolers permanent deformation shall not exceed 20 100 mm mm length by applying a torque equal 30 Nm static load- 500 H and should not be in the steering rod with respect to the application on both sides of steering loads of 130 N.