Voorbeelden van het gebruik van Positive terminal in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
Both lines to the positive terminal.
Insert the positive terminal of the battery into the compartment first.
Connect that to the positive terminal.
To access the positive terminal, remove the cover from the positive terminal Fig.1.
Open the red cap on the positive terminal Fig. 315►.
known as the cathode the positive terminal.
Wedged between the positive terminal and the frame.
Before jump-starting the AudiTT you must open the cap on the positive terminal.
Refit the cap -2- onto the positive terminal and fit the cover -1-.
Connect the charger cables correctly to the earth point--- and positive terminal.
I found this… wedged between the positive terminal and the frame.- What?
Undo and remove the screw(4) of the positive terminal(+).
Refit the cap -2- onto the positive terminal and fit the cover -1- Fig.1.
Unscrew and remove the screw(5) from the positive terminal(+).
The larger orbital overlap between the positive terminal of carbon and hydrogen partial negative creates imperfect Group.
Connect one end of the red jump lead to the positive terminal -1- Fig.
In lithium ion batteries, the positive terminal is made of lithium metal oxide and the negative terminal is made of carbon.
Connect your voltmeter's positive lead to the positive terminal on your battery.
you should connect the common end with the positive terminal of potential, and connecting the input end with negative terminal of potential for ensuring the potential of common end is higher than the one of input end.
a cable to the positive terminal and one to the negative.
Cm connecting cable for battery positive terminal with 10 mm² cross section.
Connect the charger cables to the earth point(-) and positive terminal(+) as specified.
I found this… wedged between the positive terminal and the frame.
Secure the other red clamp to the positive terminal on the donor battery.
To assemble, first insert the 360mAh rechargeable battery(positive terminal first) into the battery housing.
You may have to open a protective cover on the positive terminal on your Audi A1 before connecting the cable.
Connect the other end of the positive lead(red) to the positive terminal -2- of the boosting battery-A.
with the flat side(case) as the positive terminal(cathode) and the rounded side as the negative terminal anode.