Voorbeelden van het gebruik van Press the reset button in het Engels en hun vertalingen in het Nederlands
{-}
-
Colloquial
-
Official
-
Ecclesiastic
-
Medicine
-
Financial
-
Computer
-
Ecclesiastic
-
Official/political
-
Programming
Press the reset button.
Anybody can press the reset button.
Press the reset button.
Hard reset: press the reset button.
Press the reset button directly under it.
To clear the counter, press the reset button. Loading….
Press the RESET button with a pen or a paper clip, etc.
Insert the new chip in the slot, press the reset button under it.
Press the RESET button to test again your compatibility. Tweet.
To remedy the incorrect piston position, press the RESET button.
If you briefly press the reset button, your maveo box will shut down.
Please press the reset button for 3 seconds,
Okay, insert the new chip in the slot, press the reset button under it.
Press the RESET button on any sensors that cannot be connected.
To clear the counter and the receipt, press the reset button. Loading… Extra.
Press the Reset button for 10 seconds to reset the device.
If you are unable to update the firmware, please try again using another USB device and press the Reset button.
Press the RESET button on any sensor that was disconnected.
please press the reset button at the back of the camera for 5-10 seconds.
Press the RESET button until the right position of amperes, is indicated.
please use another USB memory device and press the Reset button.
You can then press the reset button on the front of the appliance;
To count, just press the large button and to start counting again, simply press the reset button and the display goes back to zero.
Press the reset button on the back of the device to restart your program.
you can press the reset button for 3 seconds to reset the administrator password
Press the reset button -10- Fig.► twice in the first five seconds after switching on the ignition.
When this function is turned on, you can press the reset button for 3 seconds to reset the administrator password
Press the reset button(k) on the control unit
Pressing the Reset button on the device.