Test surface for colour fastness prior to cleaning.
Test op het oppervlak voor kleurvastheid voor gebruik.
Write a few lines on the test surface.
Trek met de marker een paar lijnen op het testpapier.
The test surface must meet four design requirements.
De verharding van de proefbaan moet aan vier theoretische eisen voldoen.
The structure of the test surface is changed.
De structuur van het testoppervlak is veranderd.
For the test, blood serum or blood is applied to the test surface.
Voor de sneltest wordt bloedserum of bloed op het testoppervlak aangebracht.
Documentation of the test surface and of tests performed on it.
Documentatie over de testbaan en de daarop uitgevoerde tests.
Supplied with abrasive stone to prepare test surface.
Geleverd met schuursteen om de test oppervlakte voor te bereiden.
A green coloration of the test surface is indicative for the presence of blood.
Een groene verkleuring van het oppervlak is indicatief voor de aanwezigheid van bloed.
Apply an even pressure to the dolly to ensure that the dolly face is parallel to the test surface.
Druk gelijkmatig op de dolly om ervoor te zorgen dat deze parallel aan het testoppervlak staat.
The sample is placed on the test surface and clamped;
De steekproef wordt geplaatst op de testoppervlakte en vastgeklemd;
The structure of the test surface is changed 0 test surface severely changed or destroyed.
De structuur van het testoppervlak is veranderd 0 Het testoppervlak is sterk veranderd of verwoest.
magnetic disc from the test surface and place on to the measurement electrodes.
de magnetische schijf van het testoppervlak en plaats deze op de meetelektroden.
offer a reproducible and uniform test surface.
bieden een reproduceerbaar en eenvormig testoppervlak.
And that's not all: the durability of the test surface is even greater than before.
Meer nog, de slijtvastheid van het testoppervlak ligt zelfs hoger dan voorheen.
machine compacted with the specified test surface material.
verdicht en van het gespecificeerde, voor proeven bestemde wegdek moet worden voorzien.
Measurements of air as well as test surface temperature are mandatory.
Zowel de temperatuur van de lucht als van de testbaan moeten worden gemeten.
above 40 oC or the test surface temperature is below 5 oC or above 50 oC.
40 oC of indien de temperatuur van het oppervlak van de testbaan minder dan 5 oC of meer dan 50 oC bedraagt.
The measuring section must be level; the test surface must be dry and clean for all measurements.
Het gedeelte waar wordt gemeten moet vlak zijn; het testoppervlak moet bij alle metingen droog en schoon zijn.
constant intensity light beam, at a fixed angle, on to the test surface and then monitoring the amount of reflected light from the same angle.
onder een vaste hoek op een testoppervlak te schijnen en daarna onder dezelfde hoekde hoeveelheid gereflecteerd licht vast te stellen.
The sensor should be positioned at a height of 1,2 m± 0,1 m above the test surface level in order to minimise the influence of the test surface thermal radiation at low airflows.
De sensor moet op 1, 2 m ± 0, 1 m boven de testbaan worden geplaatst, teneinde de invloed van warmtestraling vanaf de testbaan in de lage luchtstromen zo gering mogelijk te houden.
aluminum test substrates have been recognized as the world standard for a consistent and uniform test surface for paints, plating,
50 jaar worden de Q-PANEL testsubstraten erkend als wereldwijde standaard voor consistente, uniforme testoppervlakken voor verven, beplatingen,
Q-PANEL test substrates have been recognized as the world standard for a consistent and uniform test surface for paints, plating,
50 jaar worden de Q-PANEL testsubstraten erkend als wereldwijde standaard voor consistente, uniforme testoppervlakken voor verven, beplatingen,
Testing surface of a small hollow space.
Testende oppervlakte van een kleine holle ruimte.
wipe with biologically tested surface disinfectants pH between 2.5- 9;
veeg met biologisch geteste oppervlakte ontsmettingsmiddelen pH tussen 2,5-9;
Uitslagen: 28,
Tijd: 0.0402
Hoe "test surface" te gebruiken in een Engels zin
Recommended to test Spray Away in an inconspicuous location to test surface compatibility.
During examination only those inclusions present at the test surface can be detected.
The culture medium containing the microbes from the test surface is incubated e.g.
Frequently the test surface is prepared with a grinder to remove surface conditions.
NOTE: Test surface region initial as noted on any glue remover you obtain!
ECDL demo tests serve for learning about the graphical test surface of Enlight.
Half of the test surface is hard coated with 0.003" hard alloy chrome.
Turning to FIG. 2, additional detail of the test surface 102 is provided.
The test surface shall be free from standing water, snow or ice.
1.1.3.1.
Visual inspection requires adequate illumination of the test surface and proper visual acuity.
English
Deutsch
Español
Français
عربى
Български
বাংলা
Český
Dansk
Ελληνικά
Suomi
עִברִית
हिंदी
Hrvatski
Magyar
Bahasa indonesia
Italiano
日本語
Қазақ
한국어
മലയാളം
मराठी
Bahasa malay
Norsk
Polski
Português
Română
Русский
Slovenský
Slovenski
Српски
Svenska
தமிழ்
తెలుగు
ไทย
Tagalog
Turkce
Українська
اردو
Tiếng việt
中文