Примеры использования Additional light source на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Additional light source.
It should be understood that the flash is only an additional light source in the room, and not primary.
Additional light source of bend light. .
The test voltage for the measurement with this additional light source shall be the same as in paragraph 6.2.5.4.
Additional light source for night vision systems.
In the case… mode, orfunction which is activated for a short time with an additional light source.
Additional light source or LED module(s) of bend light. .
In the event that the principal light source fails, this additional light source shall be automatically switched off.
Additional light source operating automatically in conjunction with the direction indicator.
The test voltage for the measurement with this additional light source shall be the same as in paragraph 6.2.5.4.
One additional light source inside the passing beam headlamp according to Regulation No. 37 may be used to contribute to bend lighting.
Bend lighting may be produced by activating one additional light source being part of the passing beam headlamp.
Means of one additional light source without moving horizontally the kink of the elbow of the cut-off, measurements shall be carried out with this light source activated.
Proposal for Amendment to Regulation No. 113(Headlamps emitting a symmetrical beam)for introducing additional light source and additional light unit.
Also suitable as additional light source in terrariums and paludariums as to enhance photo synthesis or coloration.
The requirements in paragraph 6.2.6. above shall also apply to headlamps designed to provide bend lighting and/or that include the additional light source referred to in paragraph 6.2.5.2.
The test voltage for the measurement with this additional light source or LED module(s) shall be the same as in paragraph 6.2.4.4.
The requirements in paragraph 6.2.5. above shall also apply to headlamps designed to provide bend lighting and/or that include the additional light source referred to in paragraph 6.2.10.2.
The test voltage for the measurement with this additional light source and/or LED module(s) shall be the same as in paragraph 6.2.4.4.
One additional light source according to Regulation No. 37 or one or more additional LED module(s) may be used inside the passing beam headlamp to contribute to bend lighting.
In the event that the gas-discharge light source fails, this additional light source and/or LED module(s) shall be automatically switched off.
One additional light source according to Regulation No. 37, or one or more LED module(s) inside the passing beam headlamp, may be used for the purposes of generating infrared radiation.
Bend lighting may be produced by activating one additional light source according to Regulation No. 37 being part of the passing beam headlamp.
The requirements in paragraph 6.2.6. above shall also apply to headlamps designed to provide bend lighting and/or that include the additional light source referred to in paragraph 6.2.5.2.
One additional light source according to Regulation No. 37 and/or one or more LED module(s), inside the passing beam headlamp, may be used for the purposes of generating infrared radiation.
In the event that the principal light source or(one of) the principal LED module(s)fails, this additional light source and/or LED module(s) shall be automatically switched off;
One additional light source according to Regulation No. 37, and/or one or more LED module(s) inside the passing beam headlamp, may be used for the purposes of generating infrared radiation.
The requirements in paragraph 6.2.4. above shall also apply to headlamps designed to provide bend lighting and/or that include the additional light source or LED module(s) referred to in paragraph 6.2.9.2.
One additional light source according to Regulation No. 37 or one or more additional LED module(s) may be used inside the passing beam headlamp to contribute to bend lighting;
GRE concluded the discussion and noted that an additional light source inside the dipped-beam headlamp or in a lamp reciprocally incorporated with the dipped-beam headlamp to produce the bent lighting was possible without changing the"single lamp" status of such dipped-beam headlamp.