Примеры использования Bank switching на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Bank Switching setup.
The unit is able to control Bank Switching by 7th channel of the receiver.
Bank Switching setup.
By changing Gyro Gains we can perform bank switching in this method.
A bank switching scheme was used.
Connect the cable to the AUX2 port and allow Bank Switching in the software.
Bank switching originated in minicomputer systems.
The unassigned channel could be used in another way,e.g. for Bank switching.
Bank Switching will be performed via Aux 2 switch. .
The restriction of Z80 system to a 64 KB address space can be solved with bank switching.
Bank switching was still being used on later game systems.
The entirety of the VRAM memory was mapped on to the I/O area,so it was controlled without bank switching.
Otherwise Bank Switching or Real-Time tuning features will be temporarily disabled.
When a channel for Bank function is assigned,then Bank switching is activated(See chapter 5.6).
Then, Bank switching is performed using the software in bottom part of the window.
Quote_'''Never perform the configuration when flying When using the Bank Switching or Real-Time tuning features the menu will take full control over it.
Bank Switching in this method can be used only with Spektrum DSM2/X satellite and 7ch radio.
Never perform the configuration when flying When using the Bank Switching or Real-Time tuning features while the Integration is active, the menu will take full control over it.
Bank switching can be considered as a way of extending the address bus of a processor with some external register.
The Nintendo Entertainment System contained a modified 6502 but its cartridges sometimes contained a megabit or more of ROM,addressed via bank switching called a Multi-Memory Controller.
For the Bank Switching there is a parameter''Bank'' in the main menu where you can manually change the banks.
In video game systems, bank switching allowed larger games to be developed for play on existing consoles.
Bank switching is a technique used in computer design to increase the amount of usable memory beyond the amount directly addressable by the processor.
On the other hand,you can use a Bank Switching feature and program a different Function and Rudder Gain for each bank. .
For the Bank Switching there is a menu''Bank Switching'' where you can manually change the banks. Always close the integration menu with'''Close the menu'''.
Many modern microcontrollers andmicroprocessors use bank switching to manage random-access memory, non-volatile memory, input-output devices and system management registers in small embedded systems.
Bank switching was later supplanted by segmentation in many 16-bit systems, which in turn gave way to paging memory management units.
To verify that the Bank switching is working properly, please start the software and look at the Diagnostic tab.
Bank switching, a technique that allowed two different parts of the program to use the same memory addresses, was required for the larger cartridges to work.
When using the Bank Switching or Real-Time tuning features the menu will take full control over it.