Примеры использования Conversion efficiency на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Methane conversion efficiency.
Laser engraving machine laser marking system using high-performance semiconductor matrix,the laser conversion efficiency greatly improved.
Conversion efficiency PF Penetration fraction.
Penetration fraction E conversion efficiency.
The conversion efficiency at full load is more than 85.
Delta UPSs offer the highest power conversion efficiency ensuring maximum load capacity.
The conversion efficiency of solar energy in such elements is 12.
Energy saving and environment protection much more electro-optical conversion efficiency up to 30%, 3 times higher than CO2 laser power.
High power conversion efficiency, less interference, quick and stable charging.
Penetration fraction PF" means the deviation from ideal functioning of a non-methane cutter see Conversion efficiency of non-methane cutter(NMC) E.
Improve energy conversion efficiency to reduce coal combustion.
High efficiency, high mechanical quality factor, obtaining high electric-acoustic conversion efficiency work at the resonance frequency points.
The conversion efficiency of light to electricity of the best solar cells is currently about 40 percent.
Much later in 2014,he headed the development team that first demonstrated the conversion of sunlight into electricity with an energy conversion efficiency of 40.
At higher temperatures, the conversion efficiency exceeds 99.99 per cent for halons and CFCs.
EX-View is a proprietary SONY technology in which the P/N junction of each photodiode in the CCD matrix is specially fabricated to have much better photon-to-electron conversion efficiency.
I think the problem is that the conversion efficiency is 0.008 lower than our theoretical calculations.
Conversion efficiency of non-methane cutter(NMC) E" means theefficiency of the conversion of a NMC that is used for removing the non-methane hydrocarbons from the sample gas by oxidizing all hydrocarbons except methane.
In spite of such efforts the power conversion efficiency obtained from bismuth ferrite is still very low.
Low conversion efficiency remains a problem in many developing countries; however, gains in processing efficiency in many industrialized countries, coupled with increasing use of recovered or non-wood fibre in pulp and paper manufacture, have helped to moderate global demand for wood raw material from forests.
On the basis of this discovery,in 1984 he predicted 25% energy conversion efficiency was feasible, while the best laboratory samples of that time were less than 17% efficient.
Such reductions may be accomplished through several of the response measures for reducing emissions from coal-fired power plants and burners that are identified in Part of this Analysis, such as fuel-switching and using renewable energy sources, improving energy efficiency in products and processes, andimproving energy conversion efficiency.
At a liner current of∼1.4 MA, the conversion efficiency of the generator electric energy into the shell energy attains 8- 9%.
Test results for both analog and digital traffic had indicated a preference for the ISL system based on the GaAlAs semiconductor diode laser because of its small size,high electrical-to-optical conversion efficiency, direct modulation capability, broad wavelength selectability, and potential for high reliability.
If the ethane conversion efficiency of the NMC is 0.98 or above, EE shall be set to 1 for any subsequent calculation.
The rectifier system connected to the diesel genset is built on Eltek HE rectifiers to ensure world class conversion efficiency, and is supporting the batteries in providing DC power to the inverter during long mains outages.
Improve energy conversion efficiency to reduce coal combustion e.g., housekeeping, maintenance, optimizing boilers.
The task will be daunting, partly because of the massive investments locked into brown energy technology and its interdependencies with the broader economic system; and partly because, as present knowledge suggests, there may be technical limits to the massive scaling up of renewable energy technologies(such as wind and solar power),given present conversion efficiency as well as the limits to deployment of those technologies and improvements in their energy-use efficiency. .
Inorganic solar cells demonstrated a conversion efficiency of just 2-3%, but this study recognized the possibility of substantially increasing these figures.
A printed gallium arsenide germanium solar cell demonstrated 40.7% conversion efficiency, eight times that of the best organic cells, approaching the best performance of crystalline silicon.