Примеры использования Overload and short на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Overload and short circuit protections.
Long-term protection against overload and short off.
Overload and short circuit protections.
MCB of suitable rating with overload and short circuit protection.
Overload and short circuit protection: Separate automatic incombustable circuit breaker.
DC fault+ high temperature+ overload and short circuit protections.
Overload and short circuit protection: Automatic extinguishing fuse built-in switch.
All channels of controller are protected against overload and short circuits.
Protection against overload and short-circuit currents outgoing from the main circuit breakers;
Protection: AC fuse; DC voltage, overload and short circuit.
Overload and short circuit protection: Automatic incombustible circuit breaker built in switch.
Anti-lightning-strike, surge, overload and short-circuit protection.
Overload and short circuit protection: Automatic extinguishing fuse built-in switch Safety outlet cover slides.
For cable and conductor overload and short-circuit protection.
They direct the electricity around him, and at the same time include safety switches toprotect from electric shock, minimizarea overload and short circuit protection().
Connection should be done with the use of overload and short circuit protection depending on the rated current of the installed motor.
Electroboards of series SHCHRUV/SHCHRUN are intended for installation in them of one-or three-phase counters,modular equipment and equipment for protection of networks 380/220 In from overload and short circuit currents.
Overheating, over-voltage at the output, overload and short circuit on the output.
The use of microprocessor in the electronic circuit of an automatic voltage regulator enables to realize the following function package- the extended precision of output voltage regulation, display of a current input/output voltage value on LCD display of the front panel, display of AVR status, PAUSE function with the controlled power supply delay(within 6 or 180 sec.) after its resumption, protection against high/low voltage in the power supply network, against high-frequency and impulse interferences,protection of AVR against overload and short circuit.
The display is switched on with delay,power supply has overload and short circuit protection.
Protection from over-/undervoltage, overload and short circuit, pulse and high-frequency interferences.
If power is not on all leads at starter,make sure overload and short circuit devices are in proper condition.
A built-in overload protection prevents damage in case of overload and short circuit by switching off the power switch in good time.
The circuit breaker allows the current margin to decrease, and overload and short circuit are likely to occur when the load changes or alternates.
Protection from current overloads and short circuits.
Automatic fuse for switching-off at overloads and short circuits.
Cases metal boards floor are applied to assemblage of the floor switchboards intended for reception and distribution of the electric power in inhabited and public buildings, and also for protection of departing lines at overloads and short circuits.
Power distribution boxes(points) СПМ/ SPM -99 and СПМ/ SPM -75 are also designed for protection of outgoing lines against overloads and short circuit currents in industrial installations.
Metering power box with the knife-switch are designed for the reception and metering active energy of voltage 380V 3-phase alternating current of frequency 50Hz systems with earthed neutral,as well as for protection of outgoing lines against overloads and short circuit currents.
Input distribution devices ВРУ/ VRU are designed(depending on the panel type) for reception, distribution and metering of electric energy of three-phase AC of voltage 380, 220V and of frequency 50 Hz,as well as for protection the lines against overloads and short circuit currents.