Примеры использования Rotary switch на Английском языке и их переводы на Русский язык
{-}
-
Official
-
Colloquial
Rotary switch for setting module address.
Set the desired function using the rotary switch.
Press the rotary switch 10 to confi rm.
Set the desired function using the rotary switch.
Set the rotary switch to the desired setting.
Set the rotary switch to diode position.
Use air pressure:0.62MPa. Rotary switch system.
Set the rotary switch to the desired setting.
The temperature is adjusted with rotary switch A.
On the rotary switch you can select the following settings.
To add more ingredients, set the rotary switch to P.
Press the rotary switch 10 to call up a selected sub-menu.
The sun roof can be operated with the rotary switch.
Basic rotary switch isolators for immediate power isolation.
Adjusting the minimum volume flow with rotary switch 5.
Set rotary switch 5 to the correct vacuum hose cross-section.
The BENNING MM 1 is turned on and off using the rotary switch.
Rotary switch- 0: OFF- M: Only massage- H+M: Massage with infrared.
Resistance Measurement- Select the Ohm symbol Ω with the rotary switch of the.
Ensure that the rotary switch is set to”0” before the unit is connected to the mains.
Voltage measurement- Select the appropriate voltage type with the rotary switch of the.
Move in the menus with rotary switch A and activate the selected function with button C.
To stop earlier press«start» button again or turn rotary switch to«O» position.
Move the rotary switch into position A» Fig. 46 on page 64, pull the recess firmly.
The appliance remains switched on as long as the rotary switch is held in this position 0.
Rotary switch configures reset type and speed monitoring mode(GLP) or time delay(GIT) GIT.
The level of orbital action can be set with rotary switch 6, even during operation.
Move the rotary switch into position A» Fig. 29 on page 46, pull the recess firmly downwards and forwards.
One or the range of two, three or four successive positions of the rotary switch can be blocked.