Приклади вживання Excess glue Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Scraper- to remove excess glue.
Excess glue is removed, where not enough, leveled.
Rag to remove excess glue.
Wipe off excess glue with a cloth and leave to dry for a day;
Cyclin- They remove excess glue with knives.
Do it carefully so that you do not get excess glue.
In the morning, remove excess glue with sandpaper.
To properly glue wallpapers on the wall,from under them by roller withdrawn air and excess glue.
Remove the excess glue with a sponge or cotton swab once, until dry.
The web is leveled with a brush or roller in the direction from the center towards the edges,to remove air and excess glue;
The rule helps to remove excess glue and properly install the tile.
Use in the process of work a transparent glue of instant drying, tweezers and clean matter,which remove excess glue.
If necessary, remove the excess glue between the teeth with toothpicks.
Therefore, do not take the standard of someone's value, count yourself,otherwise it will be a bunch of excess glue, which should be thrown out.
Through 10 pieces, remove excess glue for tiles, that he did not have time to dry.
Application: clip the lash on the middle position, dip little glue, if the glue is too much,rub off the excess glue on glad pad.
Do not forget in the process to remove excess glue and paste crosses plastic between layers.
The protruding excess glue should be immediately removed with a damp cloth, otherwise they will leave noticeable marks.
Slowly smooth them to the wall, dispersing excess glue from the middle to the edges with a plastic spatula.
After the glue has dried cut the excess on the corners and mount the plinth.
When the jar is completely wrapped with burlap,it is necessary to cut off excess and fix the edge with glue.
To the same result results the excess of the share of apple puree, agar glue and molasses in the recipe.
Thus, when you squeeze the glue, you can not calculate the force of pressing and get it with excess.
After gluing is completed, all excess is removed from the surface and seams.
After this, we will need to fasten the clasp to the skin and, gluing it to the base, cut off excess edges.
You just need to trim the excess, rounding off the mask andgiving it the shape of a cat's face, and then gluing the ears.
Removing excess water with a napkin, soddenThe motif is glued to the selected surface.
A convenient dispenser does not allow the excess mass of glue to stand out. Instructions for gluing:. .
Embroidery with an owl is glued to the leather workpiece and excess parts are cut off.
A small amount of glue will not allow the baseboard, and the excess will cause streaks.