Приклади вживання Rubber seal Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
E039 Rubber Seal.
Rubber sealing plate.
Hydraulic Rubber Seal.
Rubber Seal Cover Strip.
Connection on a silicone or rubber seal.
Wear rubber sealing rings.
For passenger cars(with outside rubber seal).
Molded rubber seals- Newtech.
There are many kinds of products have the membrane keypad, foils, label, nameplate,rubber keypad, rubber seal on.
XZB/C-350 The type rubber seal and pipe connect….
Rubber seal on washing machines develops dark or black mold spots.
Low Melt Bags for Rubber Seals and Shock Absorb….
Rubber seals on washing machines often develop dark or black mold spots.
Category: Starter rubber seals Replacement for: Bosch.
Window Wizard Magnetic brush consists of a very simple design- two separate plastic parts, in the case where the magneticelements are covered with a soft sponge and a rubber seal.
Plus, the rubber sealing in the fact that it runs perfectly.
Replacing a rubber seal in metal-plastic windows- replacing sealing rubber with windows in Kiev seal replacement price.
Install the 28 steel ring with rubber seal into the mechanism housing.
Since the 1980s, the rubber seal strips have been applied to automobiles, doors and windows, cabinets, refrigerators, containers and other industries.
Adopt air-seal valve, valve piston with long-lived rubber seal and independent control nozzle technology and parts.
Replacing the rubber seal in plastic windows begins by dismantling the old part.
All doors are equipped with 2 locks, a handle on the rosette,2 antislits, and a rubber seal around the perimeter, to provide heat and noise insulation.
Securing the accumulator using the rubber seal will reduce the level of vibration.
As explained in the company, the rubber seal in the engine compartment, which acts as a noise reduction, may stick to the hood when opened.
Domestic lubricant for rubber sealing rings in rotary hammers.
SUNRISE can extrude silicone rubber seals for doors and windows per your design.
Roof and clean outdoor application rubber seal ring junction, by complete sealing under roof.
At the free end of the locked sleeve, install the rubber seal and strip its inner diameter with sandpaper until the cover is conveniently fixed in the case.