Приклади вживання The switches Англійська мовою та їх переклад на Українською
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Choosing the switches was a challenge.
With all that sorted, I just had to solder the switches.
The switches can be used as usual.
Activate avionics with a switch on the switches panel.
Make all the switches and sockets red box.
Люди також перекладають
Section Publish to other accounts. Click on the switches next to.
The switches have been certified in Ukraine and Russia.
If a keyboard gets wet, I have bigger problems than the switches.
Replace the switches in the house with smart ones.
Right- of data under different modes and the switches of the stand.
Next, I lined up the switches and pressed the plate down.
Find the switches that will open the floodgates to follow your way.
Soldering the switches here is the same as any other board.
Next, I had to confirm my layout and plug the switches into the top plate.
This includes the switches and FSDFX panels. You will notice the. .
The switches at the front door to the room placed so that the open.
In some cases you will have to use the switches to create bridges between the islands.
The switches can be used to control the devices remotely by activating the foot pedal.
Knowledge and understanding of the principles of the switches, routers and network technologies;
Next, I plugged the switches into the plate and estimated the spacing.
The switches I like for typing tend to be heavy and tactile, but that's not ideal for games.
Some owners also suspect the switches can go bad at random without dust infiltration.
The switches use a bridge or a router in order to split a larger collision domain to smaller collision domains, resulting in lesser collisions.
I have also noticed that all the switches are within arm's reach, so that you don't have to take your eyes off the road.
The switches provide integrated network security to reducethe risk of a security breach, with IEEE 802.1X port security to control access to your network.
I used keycaps to confirm the switches were in the right locations since the PCB supports several different layouts.
The switches form an electrical connection between the two users and the setting of these switches is determined electronically when the caller dials the number.