Примери за използване на Allowable pressure на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Allowable pressure: up to 1.8 bar.
Their maximum allowable pressure PS.
Value with nominal pressure(as may be specified the maximum allowable pressure in MPa).
Their maximum allowable pressure PS, and.
At a pressure higher than its maximum allowable pressure.
The maximum allowable pressure multiplied by the coefficient 1,43, whichever is the greater.
V of not more than 500 bar-L and a maximum allowable pressure not exceeding 7 bar;
The maximum allowable pressure multiplied by the coefficient 1,43, whichever is the greater.
Whereas this Directive applies to equipment subject to a maximum allowable pressure PS exceeding 0,5 bar;
Under the allowable pressure, the pumps of this type also can be installed in multistage series.
These devices must be so designed that the pressure will not permanently exceed the maximum allowable pressure PS;
Maximum allowable pressure Means the maximum pressure for which the equipment is designed, as specified by the manufacturer.
The Directive applies to the pressure equipment andassemblies with a maximum allowable pressure(PS) is greater than 0.5 bar.
The calculation pressures must not be less than the maximum allowable pressures and take into account static head and dynamic fluid pressures and the decomposition of unstable fluids.
The PED is a guideline for the design andmanufacture of pressure equipment with maximum allowable pressure greater than 0.5 bar.
Steel pipelines for transporting hot water with a temperature above 110oC of which the product of the maximum allowable pressure in megapascals and the the nominal diameter in millimetres is greater than 100.
It applies to pressure vessels, steam boilers, pipelines, heat exchangers, storage tanks, pressure relief devices, valves, regulators andother pressure equipment with a maximum allowable pressure above 0.5 bar.
Steel pipelines for transporting steam at pressures above 0.6МРа of which the product of the maximum allowable pressure in megapascals and the the nominal diameter in millimetres is greater than 100.
Vessels designed for the transport and distribution of drinks having a PS 7V of not more than 500 bar 7L and a maximum allowable pressure not exceeding 7 bar;
This directive will be applied to the pressure equipment subjected to a maximum allowable pressure PS greater than 0.5 bar.
(r) vessels designed for the transport and distribution of drinks having a PS·V of not more than 500 bar·L and a maximum allowable pressure not exceeding 7 bar;
Mobile fire extinguishers- Part 2: Requirements for the construction, pressure resistance andmechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1.
The PED has a wide scope, covering the design, manufacture and conformity assessment of pressure equipment andassemblies with a maximum allowable pressure PS greater than 0.5 bar.
That corresponding to the maximum loading to which the pressure equipment may be subject in service taking into account its maximum allowable pressure and its maximum allowable temperature, multiplied by the coefficient 1,25.
The Pressure Equipment Directive(PED)(/68/EU) applies to the design, manufacture and conformity assessment of stationary pressure equipment with a maximum allowable pressure greater than 0,5 bar.
This Directive applies to the design, manufacture and conformity assessment of pressure equipment andassemblies with a maximum allowable pressure PS greater than 0.5 bar.
In addition, it provides you with a convenient in the product identification, including wall thickness, tubing size and thickness,maximum allowable pressure, which are clearly printed on the tube.
Additions to EN 3-7 for the construction, resistance to pressure andmechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar.
Addition requirements to EN3-7 for the construction, resistant to pressure andmechanical tests for extinguishers with a maximum allowable pressure equal to/lower than 30 bar.
Portable fire extinguishers- Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure andmechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar.