Примери за използване на Analyte на Английски и техните преводи на Български
{-}
-
Medicine
-
Colloquial
-
Official
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Assay of analytes in biological matrices;
The polarity of acetone may also help extract polar analytes in mixed solvent systems.
The analyte is the substance to be separated during chromatography.
Or, the sensor may be set up so that the analyte selectively passes through a thin film.
Typical analytes are organic molecules, biomolecules, ions, and polymers.
Metrohm offers a multitude of applications for many analytes, many matrices and many industries.
There are many different types of sensors that detect different target molecules(also known as analytes).
Calculates the new concentration of a diluted analyte from comparing the values of the analyte before i.e.
The following sections provide guidance on the choice of solvents for various classes of analytes.
For example, the sensor can bind the analyte(think a lock-and-key type mechanism, but on the molecular level).
By analysing at least 20 blank materials per matrix fortified with the analyte(s) at the decision limit.
All chemical sensors target some sort of analyte, butwhat happens once the analyte is in the sensor is where the differences emerge.
By analysing at least 20 blank materials per matrix fortified with the analyte(s) at the decision limit.
A third form of sensor uses up the analyte in a chemical reaction that generates a product that creates the readable signal[source: National Research Council].
By analysing at least 20 blank materials per matrix fortified with the analyte(s) at the decision limit.
Patients with lower antibody titres for all antibody analytes including NAb had higher pegvaliase concentrations due to less immune-mediated pegvaliase clearance.
(i) Determination of resonant states of NPs of arbitrary shape andcomposition and their perturbations by analytes;
The presence of predominantly polyphenolic analytes, e.g. ellagic and gallic acids and corilagin, was confirmed.
The acid-base titration is based on the reaction that neutralization between a base or an acidic and analyte.
(2)‘Minimum Required Performance Limit(MRPL)':the lowest amount or concentration of analyte in a sample that has to be reliably detected and confirmed by official laboratories;
Biosensors have recently gained much attention in the field of health care for the management of various important analytes in a biological system.
Thus, a non- polar solvent such as hexane is often used for non-polar analytes such as PCBs, while a polar solvent like methylene chloride may be used for polar analytes.
By analysing at least 20 blank materials per matrix to be able to calculate the signal-to-noise-ratio in the time window where the analyte is expected.
Usually these chemical sensors have a colorimetric component so that when the analyte- in this case hCG- binds, it triggers a color change in the sensor, making the readout of the results pretty foolproof.
Monitoring of at least 2 specific precursor ions,each with one specific corresponding transition product ion for all labelled and unlabelled analytes in the scope of analysis.
Results: The analysis results show that high-power sonication enhances the analyte release of vegetal matrix material of Boldo at significantly better rates compared to conventional method: equal yield was released by sonication in 30 min.
The term“Catalytic Extraction Processing(CEP) or Phase Transfer Extraction(PTE) describes the liquid-liquid orsolid-liquid distribution when the extraction and removal of analytes is focussed.
Very often in the practical applications of spectrophotometry to the analysis of complex samples,the spectral bands of the analyte(i.e. the compound to be measured) are superimposed on a broad, gradually curved background.
Laboratory of Pharmaceutical Analysis- a full qualitative and quantitative analysis of pharmaceuticals and substances for the preparation ofmedical drugs is conducted, depending on the structure of the analyte.
Although the sensors work in various ways,the gist is that a chemical interaction happens between the analyte and something in the sensor, and the device produces a measurable signal- a beeping or a color change to alert us to the presence of the target molecule.