Примери за използване на External diameter на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
External diameter of the pier.
Male male external diameter- 35mm;
External diameter small: 3.7 mm.
Power plug external diameter- 5.5 mm;
External diameter bottom: 270mm.
Male connector external diameter: ф46 mm.
External Diameter Order Code.
Standard versions with and without flange. External diameter.
Fiber External Diameter(mm).
Inner diameter of reactor body External diameter.
Maximum external diameter(D) mm.
Internal diameter Ф3.4 mm and external diameter Ф 7 mm.
Upper external diameter 584± 5 mm.
For your own safety,stick as closely as possible to the orignal tyre external diameter.
Central external diameter 584± 5 mm.
Its strength characteristics are determined by the property of the material,as well as the main dimensions- the external diameter and wall thickness.
Of an external diameter exceeding 406,4 mm.
Emergency overflow PE, light grey, round DN 100, external diameter 110 mm, pipe length 490 mm.
Tube external diameter from 7 mm to 22 mm.
Wire seal for AMP connector with external diameter of the wire 1.8 to 2.4 mm.
External diameter of thermal block 25mm 34mm.
Rubber foot for speakers with external diameter 39 mm and mounting hole diameter Ф 6 mm.
External diameter of sawdust extraction- upper cover.
All tube connections are designed for 8 mm external diameter and can be inserted and removed without tools.
The external diameter of the tunnel will be 9.4 m, which allows placing both tracks in it.
Potentiometer scale, range from 0 to 10, external diameter Ø38 mm, hole diameter Ø10 mm, with black figures.
The external diameter of the tunnel will be 9.4 m, which allows placing both tracks in it.
Now, taking into account this information,it is necessary to establish the value of the external diameter of the sleeve intended for the transition mechanism.
Of an external diameter not exceeding 168,3 mm.
The main parameter of the bend that requires control is the minimum diameter of the bend,which depends on the external diameter of the pipe and the thickness of its walls.