Examples of using External diameter in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Roll paper core external diameter.
External diameter of the peel from 125 to 140 m.
Made by aluminium External diameter 48 mm.
The external diameter of the paper roll is only for reference.
Large internal lumen with a minimal external diameter.
External diameter: 300mm; inner diameter: 75mm.
Different weights, widths and thickness of external diameter.
External diameter is very similar to the existing piping diameter! .
Standard rigid pipes in general, with external diameter in inches;
Lever Position External Diameter of Paper Poll Remainder 1 φ24.
Overview General-purpose encoder with external diameter of 50 mm.
Vase with bowl external diameter greater than 13cm made of natural terracotta.
The new impression coping version has a reduced external diameter of the body.
External diameter matches diameter of pipes with 9mm insulation.
Internal diameter 7 cm and external diameter 8.5 cm.
External diameter in torsion springs decrease while the spring is working.
The permissible tolerances of the internal and external diameter unit: mm.
External diameter of hammer is adjustable according to customers' requests.
Also fits many meters with 46mm internal and 55mm external diameter top rings.
For the first tests we chose an external diameter of 30 mm and the total thickness is below the 5 mm.
This is the reason why it is usual to refer to these standard springs by the letter and external diameter p.e.
The PTFE envelope for gaskets with maximum external diameter of up to 500mm are made in one piece.
The external diameter of paper roll remainder will vary depending on the position of the paper near-end sensor lever.
It has a minimal structural length, minimal external diameter and minimal weight.
The special feature of the machine is the router system:All tools used for the edge router have the same external diameter.
Inside diameter 5 inches(125 mm) External diameter 8 inches(200mm) Core size 1 inch 25mm.
The external diameter of the selected thread spool carrier x/c should be slightly greater than the external diameter of the winding on the spool of thread.
The deflector grille and the dual grille can be placed onto the external diameter of the nozzle, until the bead engages.
Higher peripheral velocity due to the larger external diameter and thus improved sorting of the material to be transported at the same speed.
This classification corresponds, according to DIN 2093 standard,to a specific relation between the external diameter of the disc spring and its thickness.