Examples of using External diameter in English and their translations into Swedish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
-
Political
External Diameter- Imperial:-.
With its increased capacity increase of the external diameter.
External diameter of impeller(cm).
The broch has an external diameter of about 14.5 metres.
External diameter 25mm, also compatible with 24mm mod.
Miniature Bearing and small-sized ball bearing have up to 60mm in external diameter.
Of an external diameter exceeding 406,4 mm.
welded, of an external diameter of≤ 406,4 mm, of steel.
Mm 170mm External diameter of thermal block.
At these dimensions, the borehole at line stopping will never exceed 60% of the pipe external diameter.
With greatest external diameter not exceeding 30Â mm.
typically have an internal diameter of 5 nm and an external diameter of 10 nm.
I External diameter of parabolic reflector: 275mm;
When ordering, you need only specify the length, external diameter, material and wire diameter. .
De(Larger External Diameter): External diameter at large end of the spring.
600 Oersted and an external diameter< 231 mm.
External diameter- 9.1 mm,
With an external length of 27 m, and external diameter of 6.50 m, the 181 tonne tube is an imposing sight.
The external diameter is 40 mm and the internal diameter 20 mm, meaning it can be exactly adhered around the switch.
The best arrangement consists of small mushroom-shaped pieces with an external diameter of 20 mm and six openings of 1 mm around the periphery.
Their external diameter varies between 2.3 m and 9.20 m while
drilling for oil or gas, seamless, of iron or steel, of an external diameter> 406,4 mm excl.
The conductor has an external diameter of about 40 mm
of flat-rolled products of iron or steel, of an external diameter of< 406,4 mm excl.
Dimensions of the bowl: external diameter 320 mm, mounting hole diameter 285 mm, height 180 mm.
Commission Decision 97/287/EC ter minating the anti-dumping proceeding concern ing imports of ball-bearings with a greatest external diameter not exceeding 30 mm originat ing in Japan.
Dimensions of the bowl: external diameter 320 mm, mounting hole diameter 285 mm, height 180 mm.
give signal collect the clue, install external diameter 12.7mm get together chloric second rare bushing.
Designed to accept 6mm external diameter Conductive Rubber with 1.75mm
The machine is suitable for the pressure-controlled installation of cutting rings at tube ends up to an external diameter of 42 mm,