Примери за използване на Place of installation на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Place of Installation: Dubai.
Marking the place of installation.
Place of Installation:Liaoning, China.
Restrictions as to the place of installation.
Place of installation of radio facilities;
Separation at the place of installation.
Place of installation(stationary or need to move the structure).
No restriction on place of installation.
Place of installation of the pump must be protected from freezing.
This is usually the place of installation toilet.
Near the place of installation in a wall or ceiling to punch holes for the chimney.
Planks with glue applied firmly pressed to the place of installation.
Transportation to the place of installation of the equipment.
Ceramic heaters are also subdivided according to the place of installation.
Assembled gabion structures are installed at the place of installation.
Place of installation: on a tiled roof, sloping to the south or on a flat roof.
Caused by peculiarities of the place of installation and operation. This security.
The dimensions of the sheet are selected individually at the place of installation.
At the place of installation of the electric motor, you can see a pair of plastic caps.
The frame of aluminum is located at the place of installation and vertically aligned.
At the place of installation of the outlet, we draw a horizontal line parallel to the floor.
The correct length of the legs and the place of installation will affect the stability.
In the place of installation of a child's bed, you can arrange a hanging chandelier or wall sconces.
If the washing machine is already at the place of installation, the transport lock must be loosened.
This number also includes metal additional elements intended for finishing door andwindow openings with minor modifications in the place of installation.
Previously, the place of installation must be laid with asbestos, mica or quartz plates, as additional thermal insulation.
After approval of the project to the designatedterritory are marked by means of leveling the place of installation of masts or towers.
Step 4. Mark the place of installation of transverse beams on the surface of the wall or roof and drill holes for fasteners.
When choosing an appropriate model of the device is importanttake into account the intensity of use and place of installation of the product.