Примери за използване на Specific surface area на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Those related to the large specific surface area of the materials considered; and/or.
They consist of a woven structure of metal orplastic wires, with a high specific surface area.
The specific surface area of a particle increases with reduction of size.
Activated alumina defluoridation agent has a large specific surface area, good adsorption performance.
The specific surface area according to the BET-Theory is a common parameter for the characterization of powders.
The graphene sheets obtained are characterized by a high specific surface area and unique electronic properties.
The specific Surface area of a particle becomes larger in correlation with the reduction of the particle size.
This creates very small suspended droplets orgas bubbles yielding a very high specific surface area.
Generally, with very large pore diameters, we have smaller specific surface area, so that is not good.
They are characterized by large specific surface area, low pressure drop, uniform fluid distribution and high efficiency of mass& heat transfer.
The physical properties of iron oxides include the average particle size(APS), the specific surface area(SSA) and the bulk density(BD).
It is possible to measure the specific surface area by volume for dry solid materials or powders with the nitrogen adsorption method(“BET-method”).
It has excellent thermal conductivity, mechanical properties, high electron mobility,high specific surface area and quantum Hall effect.
The graphene sheets obtained,with high specific surface area and unique electronic properties, can be used as a good support for TiO2 to enhance the photocatalytic activity.
The physical properties of the listed iron oxides include an average particle size APS, a specific surface area SSA and a loose density BD.
The effect of crushing is to increase the specific surface area of feed, which is beneficial to animal digestion and absorption, improve and raise the processing performance of materials.
The physical properties of the listed iron oxides include the average particle size APS, the specific surface area SSA, and the bulk density BD.
The effect of grinding section is to increase the specific surface area of the feed, which is beneficial to the digestion and absorption for the animals, improving materials processing performance.
The activated alumina defluoridation agent Activated alumina defluoridation agent has a large specific surface area, good adsorption performance.
The usage of grinding system is increasing the specific surface area of feed which is good for animal digestion and absorption and improving the processing performance of raw materials.
It aims to explain the physical adsorption of gas molecules on a solid surface andserves as the basis for an important analysis technique for the measurement of the specific surface area of a material.
Form dense physical isolation layer due to the high specific surface area and ultra-thin planar structure of graphene.
Brunauer- Emmett- Teller(BET) theory aims to explain the physical adsorption of gas molecules on a solid surface andserves as the basis for an important analysis technique for the measurement of the specific surface area of materials.”.
Because cement particles react with water at their surface, the specific surface area is directly related to the cement's initial reactivity.
As the specific surface area of the phase boundary is influential for the chemical rate of reaction this significant reduction in droplet diameter improves the reaction kinetics and reduces or eliminates the need for phase-transfer agents.
BET surface area measurements indicate that Matrix contains nearly 10 times the specific surface area of Substrat Pro, and more than 20 times the specific surface area of MicroMec.
The air bubbles are not extra fine- where the coefficient α(defined as the ratio of oxygen transfer efficiencies in wastewater to clean water under standard conditions)is low, nor are too large- where the specific surface area for contact is small.
However, the specific surface area of graphene tends to be agglomerated together, which not only reduces its adsorption capacity but also affects the excellent performance of graphene itself, thus affecting the performance of graphene reinforced composites.
Exposure of the reagents and of the catalyst to each other is a key factor for many multi-phase chemical reactions.For this reason, the specific surface area of the phase boundary becomes influential for the chemical rate of reaction.