Примери за използване на Working material на Английски и техните преводи на Български
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Preparation of working material.
The working material should be 35-40 cm.
Take a piece of working material;
For the working material need to reinforce one of the wires.
The increased speed of drying of working material.
Gently bend the working material, thread three beads of red hue;
Experts recommend to focus on the working material.
Depending on the working material, the cutting part itself is selected.
The important point is the presence of a practically incompressible working material.
Extend the long end of the working material through the last element;
On the working material, for example, on a sheet of chipboard, fixed base with a ruler.
ME will not provide any laptop or working material for the workshop.
Convenience is that the position of the tool is not corrected,namely, the working material.
To stretch the working material through 2-beads, forming the second row;
You should bring it to the"face" of the working material(lower left corner);
And secondly, the working material can be positioned under the base on which the ruler is installed.
Therefore, it is recommended, depending on the working material, to select an appropriate drill.
Moreover, the time spent on this is very little,it depends on the thickness of the working material.
There, I will not get to the“working material” until I develop a special sensing organ.
Today it is possible to use completely different cutting discs(depending on the working material).
Gently twist the ends of the working material, the rest of the berries do the same;
This action leads to the safety of the motor in cases where the drill is stuck in the working material.
The rim is also wrapped with a working material suitable shade and stick to it an elegant hat.
An integral element of the bottle jack is a liquid that has the characteristics of an incompressible working material.
As mentioned earlier,all of my files, working material, and content is on“D”, not“C”.
It is a cement-bound working material that has a very good strength development and, after drying, is weather and frost resistant.
As mentioned earlier,all of my files, working material, and content is on“D”, not“C”.
The cutting of the working material is carried out by a special file, which comes into working condition at the expense of the electric motor.
In the process of cutting,the saw is held with both hands, and the working material is initially fixed on the surface.
There is a relay that prevents spontaneous shutdown when the voltage drops, anda rotation speed regulator for various types of working material.