Примери коришћења High gloss на Енглеском и њихови преводи на Српски
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
The high gloss finish.
It can be polished to high gloss.
The paint is high gloss and is combined with a holo finish.
The best cleaning for high gloss kitchens.
I'd like all the wood here and the moldings done in high gloss.
Have been a maroon for 4 years High gloss kitchen, I knew that she was care-intensive.
Now the soapstone is polished to a high gloss.
Clear PVC Film with High Gloss, Flat and Flow Mark Free, Weather Resistant.
In this manual we want to paint the MDF boards with high gloss.
The granite can be polished to high gloss; therefore it is aesthetically highly acceptable material.
They are irreplaceable in systems where very high gloss is required.
Whether matt or high gloss, the medium-density fiberboard does not show any wood structure later.
The only downside- on stainless steel is very difficult to maintain the high gloss finish.
It can be polished to achieve a very high gloss and make it look even richer and more elegant.
Apply at least two coats of clear coat with the foam roller for a brilliant high gloss.
To achieve true high gloss, you should end up with a 400 grit sandpaper after the last coat of paint.
Without an electric grinder,painting an MDF board to a high gloss is hardly possible.
Coins from Section 1 hereof shall be made in the high gloss technique, from alloy of the following composition: 70% of copper, 12% of nickel and 18% of zinc.
You will have a little less work if you want to achieve a semi-gloss finish without high gloss.
It may be polished in order toachieve a very high gloss, as well as make it look much richer and much more elegant.
Much like other paint, spray paint has several different finish options,from flat to high gloss.
Tip: If you just want to paint some very small MDF boards with a high gloss, then spray cans with car paint are very good.
Beforehand, the tip of a new device or one that has already been in operation should be cleaned with a file and sandpaper to a high gloss.
PVC high gloss edge bandings are finished by coating a layer of high gloss ink, the products surface reflects a mirror effect, rich in color, and high gloss effect, the glossiness is over 70%.
Well suited for polishing the very smooth andhighly reflective high gloss fronts are the following.
Finishing massive elements is carried out in a controlled environment and performs quality imported lacquers based on polyurethane or water, ora full overlay of matte paint up to a high gloss.
Quantitative is generally 105~ 300g/ m2, paper uniform and compact, high brightness(85%),the paper smooth high gloss, the coating is consistent, easy to get in the print after the clear and clear patterns and text.
Nevertheless, you should still apply a clear coat as a finishing touch,which can not only bring the surface of the fiberboard to a high gloss, but also protect it.
Common lithographic printing ink including offset printing ink, high gloss offset ink, resinous offset ink, web-fed-offset ink, sheet-fed offset ink, four colors process offset ink, quick-set offset ink, offset tin-printing ink, sterilization resistance offset tin-printing ink and collotype printing ink.
Paper uniform and compact, high brightness(more than 85%),the paper smooth high gloss, the coating is consistent.