英語 での External trigger の使用例とその 日本語 への翻訳
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
PIN External Trigger.
Start workflow by external trigger.
External trigger(Optional).
Clear of counter for external trigger signal.
External trigger input terminal.
Capture operation by external trigger input.
No external trigger is required.
It is also possible to save using an external trigger.
External trigger cable for MAESTRO.
Scan mode: automatic, non- external trigger scanning;
Channel external trigger input, 1 channel flash output.
Scan mode: automatic, non- external trigger scanning;
Support external trigger acquisition and flash light control.
Scanning mode: Full Auto, non external trigger condition scan mode.
External trigger mode(Fixed trigger shutter mode/ Pulse width trigger shutter mode).
Manual(software), external trigger, pre-trigger.
Signal analyzer MSA 500 can operate the counter with an external trigger input.
Support Opto-isolated external trigger interface GPIO;
CTR_OUT Nothing Transmission request of count value for external trigger signal(32bit).
Since it has an external trigger terminal, it can be controlled with a foot switch or PLC.
SAG Strobe Strobe light emission via external trigger signal-- AC100V.
Users can add on an external trigger function to synchronize waveform display and external signal.
SAGW Strobe Strobe light emission via external trigger signal-- AC100~240V.
They align an external trigger(the ping) with an internal trigger(a feeling of boredom, uncertainty, insecurity, etc.).
With board-level frame buffer, double frame buffer preview,double frame buffer with external trigger real-time acquisition;
By providing the speed meter pulse to external trigger input of MSA538, the measurement position can be obtained.
Meter inputs(also used as External Trigger Input for the Oscilloscope Mode) 4 mm banana inputs, fully isolated from scope inputs and from scope ground.
Since the vehicle speed pulse is input to the external trigger terminal in MSA 500, the noise countermeasure is carried out in the connection cable.
Since the input impedance of the external trigger input terminal of MSA500 is 10kΩ, the voltage division ratio is about 1/5.