支撑结构 英语是什么意思 - 英语翻译

• support structure
• support structures
• supporting structure
• supporting structures

在 中文 中使用 支撑结构 的示例及其翻译为 英语

钟声及其支撑结构受损的程度尚不清楚。
The extent of any damage to the bells and their support structure is unclear.

我们没有使用任何支撑结构或附属结构。
We haven't used any supporting structure or sub-structures.

他们对公爵的路径是家庭的支撑结构的反映。
Their path to Duke is a reflection of their family support structure.

最后，支撑结构被移除并且组件与托盘分离。
Finally, the supporting structures are removed and the component is separated from the tray.

少维护和组件寿命更长,降低压力的支撑结构.
Less maintenance and longer component life due to lower stress on the support structure.

最后，支撑结构会被移除，组件与托盘分离。
The supporting structures are then removed, and the component is separated from the plate.

最后，支撑结构会被移除，组件与托盘分离。
Finally, the supporting structures are removed and the component is separated from the tray.

此外，SEAM允许研究人员实现复杂的几何形状而无需支撑结构。
SEAM allows researchers to implement complex geometries without supporting structures.

拆除支撑结构总是增加生产成本和时间。
The removal of support structures always adds additional cost and time to production.

拆除支撑结构总是增加了额外的生产成本和时间。
The removal of support structures always adds additional cost and time to production.

塔的本身只作为支撑结构。
The armature itself is only a support structure.

由于点扫描速度慢，缺乏打印支撑结构的能力，传统的TPP系统无法制造大型复杂悬垂结构。
Due to the slow point-scanning process and lack of capability to print support structures, conventional TPP systems cannot fabricate large complex and overhanging structures..

技术特点：高可靠性传动链布局：双轴承支撑结构，优化传动链布局，提高传动链承载能力。
Technical features: highly reliable transmission chain layout: the double bearing support structure optimizes the transmission chain layout and improves transmission chain carrying capacity.

支撑结构是3D打印的重要组成部分，因为它们可以制造更复杂的设计几何形状、悬垂或中空零件。
Support structures are an essential part of 3D printing, as they allow for more complex design geometries, overhangs, or hollow parts.

特别是，支撑结构采用了木框架：一种安全理想的材质来保持建筑物的隔热。
In particular, the supporting structure is made up of wooden frame: a safe and ideal material to keep the thermal insulation of the building.

由于这些支撑结构不是模型的一部分，因此需要在打印后将其删除。
Since these support structures are not part of the model, they need to be removed after printing.

这种支撑结构可以由像大猩猩一样的雄性领导，或者是像大象一样的雌性首领。
This support structure can be headed by an alpha male like with Gorillas, or by an alpha female like with elephants.

产前干细胞-来自胎儿或者支撑结构的干细胞（没有争议）.
Pre-natal stem cells- Stem cells derived from the fetus or supporting structures(non-controversial).

镶嵌玻璃的铝板系统及其钢管支撑结构的设计旨在最大限度地降低材料用量并且尽可能增加光的透射。
The aluminium glazing system and its tubular-steel supporting structure are designed to minimise materials and maximise light transmission.

该过程不需要支撑结构，并且可以容易地实现小至0.5mm的特征。
The process requires no support structure and features as small as 0.5 mm can be easily reproduced.

这些支撑结构需要在后处理过程中移除，而且由于使用了更多的[4]材料，这些支撑结构也使得零件更加昂贵。
These support structures need to be removed during post-processing and they also make the parts more expensive due to the use of more material[4].

根据拟议的OHL路线、操作和环境负荷下，电塔的结构设计和其他支撑结构.
Structural design of the towers and other supporting structures under operational and environmental loadings arising from the proposed OHL route.

支撑结构的设计是采用木材，既考虑到环境的兼容性，又符合阿尔卑斯山建筑传统，并从中汲取灵感。
The supporting structure has been conceived in timber, both for environmental compatibility and consistency with the Alpine building tradition, from which it draws inspiration.

在使用周期结束时，玻璃纤维膜、钢支撑结构和混凝土都可以轻易拆除和回收。
At the end-of-use, the fiberglass membrane, steel support structures and concrete can all be easily dismantled and recycled.”.

没有支撑结构，公司的未来仍然是一个巨大的问号。
Without a support structure, the future remains one giant question mark for the company.

不平衡转子在其旋转期间在其支撑结构和转子本身上产生压力并引起振动。
An unbalanced rotor creates a pressure on its supporting structure and the rotor itself during its rotation and causes vibration.

(a)铺设或安放地下电缆或架空电缆，建立支撑结构并在其上装设变电和开关设备；.
(a) to establish or place underground and overhead cables, as well as establish supporting structures and transforming and switching equipment mounted on them;

这些外部支撑结构旨在帮助员工在执行头顶工作时保护关节并减少肌肉疲劳。
These external support structures are designed to help employees when they are performing overhead tasks by protecting their joints and tiring their muscles less quickly.

电子工业：卫星天线及其支撑结构、太阳能电池翼和外壳等构件；.
The field of electronic industry: satellite antenna and support structure, solar cell wing and shell and other components;