영어에서 Test line 을 사용하는 예와 한국어로 번역
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Lcd test line.
Model Number: EIS/ELV Test Line.
EIS/ELV Test Line for Mercedes.
Set x Mercedes locks OBD test line.
Set x EIS/ELV Test Line for Mercedes.
(C) and another apparent colored line should be in the test line region(T).
The line in test line region(T) appears.
No colored band is found in test line zone.
Weak test lines usually arise from the following.
No line appears in the test line region(T).
Pilot Test Line- New Product Test& Prototype Production.
No line appears in the test line regions(T1/T2).
EIS/ELV Test Line for Mercedes(without Having to Get on the Car).
IMPULSE TESTER(BIMAL) and4 additional test lines expansion.
EIS/ELV Test Line for Mercedes Works Together with VVDI BGA.
No line appears in the test line regions(IgM and IgG).
Factory has 400 square meters, contains 4 product line and 1 test line.
The line in test line region(T) is darker than the reference line(R).
No apparent colored lines appear in the test line regions(T1 and T2).
But the line in the test line region(T) is the same as or lighter than the reference line(R).
Durable Automotive Scan Tool, Car Diagnostic Device EIS/ELV Test Line For Mercedes.
Therefore, any shade of color in the test line region(T1/T2) should be considered positive.
Note: during the drying process, a very faint shadow may appear at the Test line position.
NOTE: The intensity of the color in the test line regions may vary depending on the.
A test line(T) intensity weaker than the reference line(R) indicates a PSA level between 3-10 ng/ml.
Two computers manage the all the test lines that can perform tests separately.
A test line(T) intensity stronger than the reference line(R) indicates a PSA level more than 10ng/ml.
The control line appears in the result window, but the test line is not visible.
A test line(T) intensity equal or close to the reference line(R) indicates a PSA level of approximately 10ng/ml.
One colored line should always appear in the control line region(C) and two test lines should be in the IgG line region and IgM line region.