Ví dụ về việc sử dụng Volume flow trong Tiếng anh và bản dịch của chúng sang Tiếng việt
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Where Q is the volume flow m.
It is a volume flow measuring instrument.
Scaled output signal: Unit volume flow pulse.
The volume flow is determined by the number of cycles/second.
And from it, we can get the volume flow of the pipe.
It is a kind of light volume flow meter of which the print wheel has cumulative count and zero.
Insert doppler Ultrasonic Flow meter for volume flow measurement.
It is used to measure the volume flow of various sewage in the pipe and channel.
With these instruments, it's difficult to deduce the volume flow rate from the D/P.
At Cat Khe hydrological station, volume flow in the rainy season is 2224.71 m3/s and in dry season is 336.45 m3/s.
That is, when induced voltage E is detected,that we can get volume flow Q of the medium.
For the volume flow measurement no further measuring value such as pressure or temperature is required due to the measuring principle.
Measuring the mass flow or volume flow of gas in low flow rate.
The pulse signal proportional to theflow rate is processed to obtain the volume flow rate.
The flow measurement of natural gas is divided into volume flow measurement and mass flow measurement.
The accumulation/distribution measureseeks to identify divergences between the stock price and volume flow.
It is based on Faraday's law of electromagnetic induction,which is used to measure the volume flow of conductivity over 5 mu S/cm conductive liquid.
The effects of volume flow is almost free from the discharge pressure for the characteristics of gas forced transmission, keeping high efficiency in wide range.
This means, while measuring the thermal mass flow or standard volume flow, no additional temperature and pressure compensation is necessary.
The testo 420 volume flow hood with its integrated measuring instrument was not just developed for volume flow measurement at larger ceiling outlets.
It is based on Faraday's law of electromagnetic induction,which is used to measure the volume flow rate of conductive liquid with conductivity greater than 5μS/ cm.
This means that frequent volume flow calculations in large rooms and measurements above head height can also be carried out reliably and comfortably.
The size of the gas capacity to deal with thegas deduster is generally expressed in volume flow(m3/h or m3/s) and also of mass flow(kg/h or kg/s).
Magnetic flowmeter is mainly used to measure the volume flow of conductive liquid or slurry in closed pipeline, including strong corrosive liquid such as acid, alkali and salt.
An orifice plate flow meter is a device with a hole in it,the function of which is for measuring volume flow rate, restricting flow, or reducing pressure.
(2) The electromagnetic flow meter determines the volume flow rate in the working state by measuring the speed of the conductive liquid.
For accurate measurement, it is necessary to simultaneously track the temperature and pressure of natural gas,and convert the volume flow under different working conditions into a standard state or an agreed state volume flow.
Within some ranges of vortex(Reynolds number), the separation frequency and volume flow is proportional to the fluid of the vortex that flowing through the vortex flow sensor.
Thanks for your information,liquid turbine flow meter is a kind of volume flow meter, also the price is really low, but you should exhaust air if you want to use turbine flow meters.
Thanks to its unique advantages,mag meter has been widely applied to measure the volume flow of all kinds of conducting liquid in the process of industry, such as varies of corrosive media like acid、alkali and salt.