Examples of using Volume flow in English and their translations into Russian
{-}
-
Official
-
Colloquial
Volume flow: up to 65 l/min.
Ring line for volume flow determination A25.
Volume flow per gas path Q:.
WMZ 25 can be used for a volume flow of up to 2.5 m³/h.
High volume flow can be implemented.
Output data Pulse output: volume flow, mass flow. .
Suction volume flow: up to 470 m³/hr.
The SIHIsanivac is able to handle a suction volume flow up to 1,000 m³/h.
The volume flow can be infinitely adjusted.
Xpm is the output pump/motor torque or volume flow, Nm or m3/s.
The volume flow can be continuously adjusted.
Upm, des is the input pump/motor torque or volume flow, Nm or m3/s.
Sizes, intake volume flow 60 up to 16.000 m³/h.
Adjustable flow switch provides an alarm if volume flow is too low.
Volume flow meter for permanent quality control of parts.
Adjustable inlet parameters are volume flow, temperature and air humidity.
Nominal volume flow measurements in offshore operations on production platforms.
VA40 variable area flowmeters are used for the volume flow measurement of liquids or gases.
Reference volume flow rate, at the actual pressure and temperature m3/s.
The MP protocol is often used to integrate a volume flow controller, for example, into the zone.
Mass, volume flow, density and concentration measurement of liquids and gases.
Sensor Simulation Active Simulation of mass flow, volume flow, density or temperature.
Volume flow measurements, process control and monitoring, blending, batching.
Reference volume flow rate, corrected to a standard pressure and a standard temperature m3/s.
OPTIMASS 2400 is a coriolis mass flowmeter for bulk mass and volume flow of liquids and gases.
The delivery height and feed volume flow determine the height of the liquid in the pump reservoir.
Safe and reliable signal conversion, and amplification of the flue gas measurement data,such as temperature, volume flow, and nitrogen oxide concentration.
Complete portfolio for volume flow, mass flow, density and concentration measurement.
The choice of a control technique will depend on various parameters such as the concentrations of NMVOCin the raw gas, gas volume flow, the type and composition of NMVOC, and others.