Primjeri korištenja Plaster solution na Engleski i njihovi prijevodi na Hrvatskom
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Plaster solution, types.
It is preferable to use a plaster solution.
Clay plaster solution is prepared as follows.
As a plaster wall plaster solution.
Lime- plaster solution are prepared from 3 to 4 parts of lime and 1 part of gypsum.
Building boards, dry tow, plaster solution.
Lime plaster solution prepared from 1 part of plaster and 3-4 parts of lime.
Application of cement-sand or plaster solution;
Pay attention, in the plaster solution and the masonry mixture, crushed stone is not added.
Further dries the surface and applied plaster solution.
Cement or plaster solution used for its production, as well as acrylic composites.
The final stage is put under pressure plaster solution by machine.
On the placed sketch the plaster solution is applied in those areas where it is necessary to add volume.
Drill and a special nozzle(mixer)for fast preparation of plaster solution.
In order to ensure proper adhesion of the plaster solution to the surface, the working surface must be carefully prepared.
All slots are left, it is necessary to close up the dry tow, but not completely, leaving a third of the lumen to tow,which is moistened in a plaster solution.
To do this, a new plaster solution is taken, a little lighter in color, and applied using a semicircular trowel to the wall.
After tightening the cable in the sleeve it is fixed in Stroebe plaster solution or plaster mixture, able to quickly get to grips.
Perlite filler in plaster solution to reduce its thermal conductivity by 50%, with 3 cm resulting finishing material for the thermal insulation properties will correspond to 15 centimeters brick.
This should be done quickly andthen, when the plaster solution just applied is not dry yet, constantly moistening the roller with water.
For horizontal waterproofing of the foundation,hot or cold plaster solutions asphalt, as well as mastics with a mechanized application process, can be called the most popular.
Monolithic concrete after removing the formwork necessarily plastered solution of cement and sand(in the ratio 1: 2) on both sides.
Then prepared a solution for plaster.
A solution for plaster with your own hands.
The solution for plaster walls, master the cooking recipe.
Making the facade of the house siding today is almost the same popular solution as plaster.