Examples of using Plaster solution in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
As a plaster solution correctly.
This is the life of a plaster solution.
Plaster solution dries, usually within 24 hours.
On a flat wall adjacent small spatula applied plaster solution.
Saves plaster solution for less thin layer of its styling;
Drill and a special nozzle(mixer) for fast preparation of plaster solution.
Impose a plaster solution and excess solution removed the rule.
After all, in 6 minutes plaster solution fully sets and hardens.
Self will become the basis for the reinforcement slides construction adhesive or other bystrozastyvayuschego plaster solution. .
To do this takes a plaster solution and applied with a trowel in Stroebe.
Upon completion of all finishing work,you can for extra protection against cracking process water-repellent plaster solution.
To prepare a plaster solution with your hands is best to use plaster, natural or artificial fillers.
That they firmly"sitting" on their ground, use a plaster solution which securely grab the plastic to concrete.
Plaster walls plaster solution is carried out with their hands on the beacons, if there are significant gaps in the wall.
First profile is pressed intocakes scribbled on the wall of the back side of the plaster solution(convex part in the solution); .
Additionally prepare another plaster solution and use it to start your own hands to shape the trunk and branches of a tree, using a brush.
As plaster can be used cement-sand mortar, glinotsementny solution glinogipsovy solution and lime-plaster solution. .
To prepare lime-plaster solution for plaster walls must first be poured into the water container, then pour the ISU and mix thoroughly.
These shortcomings need to carefully fill in the sound-proof material(eg, foam, fiberglass, etc.)and then plaster plaster solution.
So the question is how to align the corner of the wall plaster solution, one of the most frequently encountered in the pages of building forums.
Before you seal the crack in the ceiling,it is necessary to fill the plaster solution is ideal Rotband by about a third and pave serpyanku, so that the middle of the tape coincides with the center of Rust.
Clay composition of the solution for plaster interior walls made of clay and sand.
We must remember that when working with plaster or alabaster solution is suitable only for 5 minutes.
Composition for plaster walls of the solution may be too bold when it sticks to the trowel.
Old tiles, plaster and the remains of the solution necessary to remove and clean the surface from dust.
Glue to a solution of the product of plaster, which is added to a carpenter's glue ratio of 3% of the total weight of adhesive solution. .
Prepare the plaster mixture, put in our treeprepared container and pour the solution.
Sokol, which will be convenient to keep the solution during the plastering process.
Rinse away various solutions plaster is useless, because the surface of the ceiling after such treatment is slim, sleek and hard release layer, which will impede the quality of work due to the low adhesion, which may cause detachments and cracksdeposited layer of plaster. .