Exemplos de uso de Friction force em Inglês e suas traduções para o Português
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
Friction force resolution[μN] 1.
Minimize thermal drift with two friction force sensors.
Friction force range up to 20 N 5 N option.
Analysis of the road surface shows a defined pattern and friction force.
The friction force(F) between Earth and the ocean acts as a brake.
As pessoas também se traduzem
In the meantime the belt andthe material are driven because of friction force.
Most of the theories assume the friction force acting over the plug movement to be negligible.
Polygon, the polygon is opened,the locking edge deformation, the friction force to.
Ensure accurate normal and friction force measurement with independent high-resolution capacitive sensors.
The most"vulnerable" parts of any design- moving against friction force you will not trample.
When the screw is tightened, the friction force can not loosen the screw, thereby replacing the other locking mode.
The tribometer was also instrumented with a load cell capable of measuring friction force variations.
Independent application of normal load and friction force measurement to avoid crosstalk between different force signals.
Wood chips will be grinded by the impact force from hammers and friction force from sieve plate.
The maximum possible friction force between two surfaces before sliding begins is the product of the coefficient of static friction and the normal force: .
The objective of this work is to measure the friction force between an ice plug and the a.
Based on the circular motion, motor or diesel engine powered, driven gear passed to spindle and flat die,cause the clamping roller rotation under the friction force function.
The systems' rotation speed,the radius of the arm and the friction force sensor are automatically calibrated with this software.
Using the signal of friction force, penetration depth, or acoustic emission, an algorithm analyzes these signals and automatically determines the critical loads without subjecting them to any operator influence.
The valve stem is equipped with a nylon bushing,which reduces the friction force and thus opens up flexibility.
The spindle adopts advanced casting process,increasing friction force, while the passive shaft is processed by grinding pin, which does not damage the surface of the workpiece, and has stable pressure, convenient adjustment and good molding process.
Moreover, the accumulation of debris on the bracket-wire interface can influence the friction force in orthodontic treatment.
Thanks to the unique design of two friction force sensors and a symmetrical elastic measuring arm, the Anton Paar pin-on-disk tribometer TRB³ overcomes thermal drift, which occurs during long periods of testing time and due to environmental temperature fluctuation.
Therefore, the present study aimed to confirm the effect of lubrication on the friction force between brackets and wires with different cross-sections.
Direct-Acting Spool Valve: The factors affecting the spool switching range of the direct-acting spool solenoid valve is mainly the solenoid force of the coil, the spring force, the static pressure of the pressure medium to the valve spool,the hydraulic force and the friction force.
Furthermore, the transferable torque andforce depend on the friction force between the two parts, which is proportional to the contact pressure.
The critical load data is used to quantify the adhesive properties of different film-substrate combinations by using different sensors(acoustic emission,penetration depth, friction force) and video microscope observations.
In additions, this product is made by unique formula andtechnics which makes the friction force further strengthened and which makes it easy to form froward loops and reverse loops also.
When the screw is screwed into the lock type steel wire Lo sets of holes, before the locking ring does not enter the polygon is loose, when the locking ring screw into the polygon, the polygon is opened,the locking edge deformation, the friction force to overcome the locking screws to screw side.
During the stance and momentum phase of gait there exist two peaks, namely:1 peak force exerted when the heel makes contact with the ground friction force and deceleration which is part of the Stance Phase SP and 2 the peak force exerted by the forefoot on the plate momentum force which is part of the Momentum Phase MP.