Exemplos de uso de Friction factor em Inglês e suas traduções para o Português
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Official/political
Explicit equation for friction factor.
Titanium alloy has large friction factors and low thermal conductivity.
The addition of small parts per million of high molecular weight polymer in turbulent flow produces a significant decrease in the friction factor.
Dynamic friction factors of some usual goods µd.
The Darcy-Weisbach equation contains a dimensionless friction factor, known as the Darcy friction factor.
The low friction factor of aluminum and the seamless connections minimize pressure drop.
Dynamic friction table• Dynamic friction factors of some usual goods µD.
Molybdenum alloy friction factor by the volume fraction of Al2O3 little effect, the friction factor values at 0.47~ 0.57 between fluctuations.
The results indicated that the louver angle is the main contributor to increase the friction factor for geo1 and geo2 for both reynolds numbers.
D team to reduce the polyamide friction factor and achieve the perfect balance between softness and resilience of the yarn.
The author showed that theaddition of little quantities of high molar weight polymers in a turbulent flow, reduces the friction factor significantly.
See table 1 so this medium increases the high friction factor, and facilitating creates the autogenous grinding.
The friction factor for laminar flow of Newtonian fluids in round tubes is often taken to be: f 16 R e{\displaystyle f={\frac{16}{Re}}} where Re is the Reynolds number of the flow.
In which So channel slope, and f dimensionless friction factor, equal to 1/8 of the Darcy-Weisbach friction factor fD.
The reduction of friction factor in turbulent flows, by additives injection, has been studied since the middle of the last century and has received wide scientific and industrial attention until now.
This work will introduce a new set of explicit equations to calculate the friction factor in cylindrical pipes and in the annular, based on theoretical physical principles.
This in turn is a ceramic material known as diamond-like carbon which has high mechanical properties such as wear resistance reconciled with a low coefficient of friction, factors that prompted this study.
It was performed the determination of the friction factors pulp, using equation to fluids that have herschel-bulkley behavior and using the dodge and metzner correlations.
The main objective is to calibrate friction and roughness in order to analyze the convenience of two techniques: calculation of the friction factor method by mti-ag and from the roughness using.
In which p mass density of water, f friction factor, equal to 1/8 of the Darcy-Weisbach friction factor fD, and V mean velocity.
It was obtained as a result that the pressure drop in fixed column beds can be estimated by making use of friction factor equations for porous media, such as ergun¿s model.
To effectively counterbalance all the friction factors normally inherent in a pneumatic conveying system, Dynamic Air has developed the DC-5 Air Saver technology which accurately controls and pressure balances the pneumatic conveying system.
The Moody chart or Moody diagram is a graph in non-dimensional form that relates the Darcy-Weisbach friction factor, Reynolds number and relative roughness for fully developed flow in a circular pipe.
Built-in expressions for Darcy friction factors cover the entire flow regime including laminar and turbulent flow, Newtonian and non-Newtonian fluids, different cross-sectional shapes or geometries, and a wide range of relative surface roughness values.
The study of hydraulic networks for operation or analysis of the feasibility for enlarging orrecovering is started by calibration. in this context, calibration can be interpreted as the identification of parameters such as friction factor, roughness and diameter.
See table 1 so this medium increases the high friction factor than wet process, and facilitating creates the"Mecano chemical activation.
Among many analogies(like Reynolds analogy, Prandtl-Taylor analogy) developed to directly relate heat transfer coefficients,mass transfer coefficients, and friction factors Chilton and Colburn J-factor analogy proved to be the most accurate.
In general, the physical parameters of the network as unknown friction factors, the absolute roughness, diameter and the identification and quantification of leaks are unknown quantities.
The analysis of the hydraulic term performance of heat exchangers is based on geometrical parameters of the equipment and uses the ess(engineering equation solve) for calculating heat transfer coefficients and pressure drop,colburn factor( j) and friction factor( f) respectively, through correlations.