Exemples d'utilisation de Selected input en Anglais et leurs traductions en Français
{-}
-
Colloquial
-
Official
DVI The selected input signal is DVI.
To the left, 7 led indicate the selected input.
The selected input has no connection.
To activate SSP Mode for a selected input.
If the selected input is a video source.
On traduit aussi
ON Turns on the 3D mode for the selected input.
Zone2: The selected input is output in zone.
OFF Turns off the 3D mode for the selected input.
The selected input is likely not the active one.
The indicator lights next to the selected input source.
The selected input signal appears on the screen.
Format, line& frame frequency of the selected input.
NTSC(eg.) The selected input signal is NTSC.
Normally out(green) converges to the selected input.
The selected input will appear in the display window.
The indicator for the selected input source glows. Example.
The selected input is displayed on the front panel display.
Start playback on the selected input source device.
The selected input signal appears on the monitor screen.
Assume that, as before, the selected input is E2.
NTSC(e.g.) The selected input signal is video signal.
DC power and22 Hz tone configurable on selected input.
Selected Input indicator blinks when the sound is muted.
The display shows the standard text for the selected input.
The selected input is displayed on the front panel display.
A front panel LED illuminates to indicate the selected input.
Not Supported Signal The selected input signal is non-supported signal.
This completes the recalibration procedure for the selected input.
KHz/ 60Hz(eg.) The selected input signal is computer RGB.
The motorway passes 75 30/35 kms from Dienne, according to the selected input.
