Exemples d'utilisation de This test method en Anglais et leurs traductions en Français
{-}
-
Official
-
Colloquial
This test method is.
The benefits of this test method are.
This test method B.
There is no bias for this test method.
This test method is widely recognized.
The benefits of this test method are.
This test method is described elsewhere[1.
DMSO is the preferred solvent for this test method.
This test method is nondestructive.
Other products may be analysed with this test method.
This test method is now part of a standard.
Definitions used in this test method are given in Appendix 1.
This test method is specified in the Amendments.
NOTE Performance requirements for this test method have not been established.
This test method fulfills the requirement of ISO 2244.
Chrome, Mozilla Firefox,Opera or Safari this test method does not work with Internet Explorer.
This test method is suitable for all types of bitumen.
Several delegations once again stressed their interest in the revision of test 6(c) because of the lack of precision,clarity and cohesion of this test method.
For the purposes of this test method the following definitions apply.
This test method can also be used for other adhesives.
In selecting one of these test methods from the list for a test parameter you are indicating that you are using this test method or an equivalent validated in-house method for assay or other determination of the test parameter and the test method is suitable for use for your product or raw material.
This test method would be specified in the proposed Amendments.
The performance characteristics of this test method were thoroughly established using the OIE certification template as a guide.
This test method uses friction heat to expose.
Although this test method has been developed specifically for P.
This test method applies to fuels used in diesel engines.
INTRODUCTION This test method is equivalent to OECD test guideline 474(2016.
This test method is relatively simple, many times, repeatedly.
This test method is used successfully with drinking water samples.
This test method covers the strain-rate range above 102 s-1.