Examples of using Initial pressure in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Initial pressure.
Throttle valve. Set initial pressure.
Lower initial pressure drops.
(b) At 65 °C and the corresponding initial pressure.
Initial pressure test date.
Gas filling: initial pressure <133Pa.
Initial pressure difference: ≦ 0.02Mpa.
Tolerance of performance initial pressure drop is ± 10%.
Ro- initial pressure in the tube.
The measuring rangeshall be 20 times higher than the initial pressure.
Initial pressure differential(ISO 3968).
Pleated filter media provides higher flow rates and lower initial pressure drop.
A low initial pressure differential(ISO 3968).
Generous screen area andproperly proportioned straining chamber to minimize initial pressure.
(ii) Initial pressure test date(month and year);
For liquefied test gases the corresponding initial pressure is the vapour pressure at 65 °C.
Initial pressure test date and witness identification.
SINOFILTEC company replacesSL-020W25B series filter core to reduce initial pressure, stable and durable, long service cycle and so on.
(iii) Initial pressure(in bar gauge or kPa gauge) 2;
Compare to other filters, the filter is designed intosmall size and it has high filtration accuracy, low initial pressure, and high dirt-holding capacity.
Initial pressure test date and identification of the authorised body.
If in the tests according to 35.4.3.2(a) no pressure rise of more than 20% has occurred,further tests at 65 °C and the corresponding initial pressure shall be performed.
Low initial pressure difference, high flux and long service life;
DT high-performance hydraulic cartridges provide 73% higher dirt-holding capacity and47% lower initial pressure drop than traditional filters- with micron ratings down to 2 μm.
The initial pressure(p0) and the highest pressure(pex) are derived from the raw data.
(b) The gas is classified as" chemically unstable at a temperature greater than 20 °C and/or a pressure greaterthan 101.3 kPa" if the test at 65 °C and the corresponding initial pressure shows a pressure rise of more than 20% of the initial absolute pressure but no such pressure rise at 20 °C and 1.01 bar(101.3 kPa).
Corresponding initial pressure means the pressure at which the test at 65 °C is carried out.
Using the throttle valve 8 to set the initial pressure, it should approach but not exceed the opening pressure of the valve 6 under test.
For test gases that are completely gaseous the corresponding initial pressure is the pressure that a gas develops at 65 °C based on the maximum(filling) pressure at ambient temperature.