Examples of using Internal surface in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
A strong internal surface that is non-stickable.
We can do hard chrome plating or internal surface of tubes.
A strong internal surface that is non-stickable.
Testing internal surface of rings and tubes with diameters over 23mm.
This equipment is very strict with internal surface as normally it was storage food.
Internal surface treatment method: honing or skiving and roller burnishing.
With pie jaws the additional centrifugal jawpressure will be spread evenly over the internal surface of the part.
In the internal surface of the pentagon thread seat. There is Light thread.
Steel pipe after subsequent procession can achieve a good internal surface and cleanliness excellent corrosion resistance.
Tank: internal surface mirror polishing treatment, roughness Ra<0.4 mu m.
The reaction between the steam and charcoal creates pores in the internal surface area, creating more adsorptive spaces.
Electropolished internal surface with roughness not exceeding 10 μin.(0.25 μm).
We offer full verification guarantees against any defects on the external or internal surface, making them superior to Glazed Pipes.
Normally the internal surface of cone need to be polishing as 0.8Ra for food/brewery tanks.
Spezilla provides a wide range of stainless steel hygienic tube with internal surface finishes that have a roughness average(Ra) of < 0.8- 1.6 μ.
(1)The internal surface of the equipment made of stainless steel to avoid pollute the raw material.
This product range provides a wide range of fittings with internal surface finishes that have a roughness average(Ra) of < 0.8- 1.6 μ.
The standard internal surface finish for clamp ferrules is less than 0.8μm Ra, external surface finish less than 2.5μm Ra.
This product range provides a wide range of tubes with internal surface finishes that have a roughness average(Ra) of < 0.8- 1.6 μ.
The internal surface of the equipment and both mixing pail and paddle made is made of stainless steel to avoid pollute the raw material.
High-density bronze roll forming or spherical oil pockets, oil hole special internal surface to reduce wear and tear to extend the use of time and good anti-corrosion function.
Smooth internal surface allows high flow speeds of the transported liquids and ensures no calcification or scaling even at high temperatures.
High density bronze roll forming or sphericaloil bag, oil hole special synthesis of internal surface to reduce wear and extend the service time and good anti-corrosion function.
The internal surface of contact lens adopts molding pressing method, while the external surface of contact lens adopts the turnery method.
In the manufacturing process, the Bundy tube uses a low-carbon lubricating oil tomake the inner surface extremely clean and the internal surface residue is less than 0.05g/m2.
The internal surface of contact lens adopts molding pressing method, while the external surface of contact lens adopts the turnery method.
Figure 2.1a Internal distribution of contact forces andcouple stresses on a differential d S{\displaystyle dS} of the internal surface S{\displaystyle S} in a continuum, as a result of the interaction between the two portions of the continuum separated by the surface. .
With their large internal surface area, they can achieve more efficient heat transfer and hence are widely used in highly effective heat exchangers.