Examples of using Repeat steps in English and their translations into Arabic
{-}
-
Colloquial
-
Political
-
Ecclesiastic
-
Ecclesiastic
-
Computer
If cake doesn't come out, repeat steps 3 and 4.
Repeat steps 4-6 for any additional desired levels.
If no insulin stream is seen, repeat steps a and b.
Repeat steps 2- 4 as many times as you like.
Repeat steps 3 through 6 for each of the client computers.
If there are no dangerous factors, repeat steps 4 to 8 about four times.
Repeat steps 2 and 3 ten times in a slow, rocking movement.
Rest for a few seconds and repeat steps one to five at least 10 times every hour.
Repeat steps(3- 7) for each point in the image plane.
In order to get one violet from the beads, repeat steps 1-4 of our master class four more times.
Repeat steps 4 through 8 to add filter actions to the list.
If you see air bubbles in the syringe,push the insulin back into the bottle and repeat steps 14 and 15.
Xml" in step 1, repeat steps b- c and replace"theme1.
If you see air bubbles in the syringe,push the insulin back into the bottle, and repeat steps 17 and 18.
Repeat steps 3 و 6 as many times as needed to fill the batch list.
(You don't need to enter a dot[.] because Google will ignore points.) Now repeat steps a, b, c and d with this new name.
Repeat steps 7 to 9 for the other up part and down part of J-26.
This is very easy: just repeat steps 4- 7 from the previous paragraph to block the existing number.
Repeat steps 3- 5, as needed, until the required oil purity level is reached.
If using 10ml vials, Just repeat steps 9 thru 12 filtering 10mls of the solution in each of the vials.
Repeat steps tutorial videos to get the experience of forming two-color motif needles.
Repeat steps 10 to 11, until the completion of course[again] power off by pressing the start button.
Repeat steps 2-4 of this master class until the chain reaches the desired length, as shown in the diagram.
(s) Repeat steps(g) to(n) for 10- 12% nominal fill aerosol cans, omitting steps(l) and(m).
Repeat Steps 1-6 for the lining, substituting the SHOULDER and SLEEVE for the SLEEVE LINING piece and ignoring the use of the TIES.
Please repeat steps 1 and 2 for each wire, securing it to the template as it would be in the finished harness.
(m) Repeat steps(g) to(l) twice more(a total of 3) for the same can at the same distance between the gas burner and the aerosol actuator;
(o) Repeat steps(g) to(n) of the test procedure at a distance between 15 and 90 cm between the actuator of the aerosol can and the burner flame depending on the outcome of each test(see also 31.4.3.1.4 and 31.4.3.1.5);