Examples of using Ph value in English and their translations into Bengali
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
They have a pH value of 7.
PH Value(30% Solution).
Single isolated 4~20mA output(pH value).
PH Value compatibility 1-13.
This permits measuring the pH value.
PH value was weak alkaline;
Adjust the water PH value to 8-109 by using caustic soda.
PH Value compatibility 1-13.
Have effluent, test pH value, adjust pH value to 8-9.
PH Value(1% water solution).
Prepare the effluent, test pH value, adjust pH value to 8-9.
Ph value of aqueou suspension.
Halogen acid gas all-emission 0 mg/g, pH value≥ 4.3, conductivity≤ 10 us/mm, toxicity index≤ 5.
PH Value Compatibility 2-13.
Cotton dyeing is operated in a certain temperature, time, PH value and the required dyeing agent for cotton.
In chloride containing solutions pitting and crevice corrosion is possible, depending on various parameters like chloride concentration,temperature, pH value, redox potential, crevice geometry and others.
The PH value is about 9 in 1% aqueous solution.
In chloride containing solutions pitting and crevice corrosion is possible, depending on various parameters like chloride concentration,temperature, pH value, redox potential, crevice geometry and others.
The PH value of the ionized water is between 5.0 and 10.
Barium sulfate precipitated as filler in the production of color letterpress printing ink, plus the amount of 10%~ 30%, stable color and oil absorption value, the fineness of 15~ 20 lm, pH value neutral.
The PH value of the output ionized water is between 5.0 and 10.
The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge.It is adaptable to wide range of pH value, between 4.0 and 10.0.
The pH value of the waste water should be adjusted to 7~8 for better result.
Through researching the dyeing process, the influence factors of dye rate include the initial dyeing temperature, heating rate,holding time, pH value of dye solution, dosage of auxiliaries for nylon and the operating method, etc.
Different pH values and acidity and alkalinity to match better flavors.
The pH value of the waste water should be adjusted to 7-10 for better result.
By auto PH value control system, water cleaning can be get rid of and reduce the waste water quantity.
If the water is acidic or acidic(pH value is less than 1), the water's pH can be increased by mixing lime, lemon, soda ash, or sodium hydroxide with water during the water purification process.