Examples of using Ph value in English and their translations into Czech
{-}
-
Colloquial
-
Official
Determine the pH value of sample with a different instrument.
This emulsion of water(hydro) and fat(lipo)has a slightly acid pH value of 5, this.
The pH value indicates the amount of H3O+-ions found in the water.
Test strips for measuring pH value, water hardness and nitrite content.
The pH value indicates the condition of the cutting fluid during use.
The formula for calculating the pH value from the concentration of hydronium ions.
The pH value can be determined upon aqueous leach, from CaCl2 or even from KCl.
If using a sample,measure the pH value with a secondary verification instrument.
The pH value is then defined as the negative logarithm of the hydrogen ion concentration.
It has a more acidic protective acid layer, with a pH value from 3.5 to 5, before menopause.
Please be aware that the pH value may vary during the day and may become considerably lower especially at night.
When the control nozzle is fully open, 3-5% admixture possible. pH value neutral 7-9.
For the control of liquids and aqueous solutions, the pH value of the liquids and often their redox potential must be checked.
Alkaline activated water- Not just a drink Daily drink up to 0,3 L per 10 kg bodyweight of water with a pH value from 8,5 to 9,5.
The advanced modern technology of the shampoo increases the pH value and opens the skin beneath your hair for optimal results.
Lowering the pH value to just under pH 7(e.g. with sera pH-minus) supports the treatment since the bacteria prefer alkaline water.
As opposed to alkaline activated water from a classic water ionizer, the pH value of the treated water remains the same.
Unique ingredients with a pH value of 5 restore enzyme activity, strengthening the natural protection layer and regulating the moisture balance of skin.
The voltage generated by the reference electrode is independent of the pH value and provides a stable potential, the so-called reference potential.
In this manner you do not obtain standard drinking water, buta very hydrogen rich, lemon mix drink with the perfectly reasonable pH value of 9- 9,5.
Standard equipment: Test strips for measuring pH value, water hardness and nitrite content; burette and pipettes.
Check the pH value using the sera pH-Test(depends on the daytime, it is usually highest at noon) and lower it with sera pH-minus if required.
Other fouling: Use damp cloth; with grease andoil dissolving cleaners if necessary neutral cleaner with pH value between 7 and 9 in the concentrate.
Yet we are obliged to point out that water with a pH value over 9,5 is not considered drinking water according to the drinking water ordinance in Germany.
The measurement procedure and the accuracy of the measurement are independent of pressure, temperature, vapor, dust, foam, viscosity,conductivity and pH value.
Anyone who wants to check the pH value and the redox potential of liquids by means of a hand-held measuring device, can in many cases resort to different devices.
In case of levels above 0.5 mg/l ammonium you should immediately react with a partial water change and by adding sera pond toxivec,especially if the pH value is above 7.
If a pH buffer not listed in the Cal Options menu is used,refer to the buffer bottle to find the pH value that corresponds to the temperature of the buffer.
Since the mixing tanks are frequently used in safeguarded procedures that must meet the highest standards, numerous measurements are taken: the tanks are equipped with industrial sensors that control the agitator drive speed and detect the temperature,pressure, pH value, and fill level of the tank.
Basically, any soluble or volatile substance can be cleaned, if the correct adsorbent agents and carrier liquid/mobile phase are used under selected andcontrolled process parameters temperature, pH value, flow speed, conductivity, etc.