Examples of using Gas flow in English and their translations into Bulgarian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
Feed Gas Flow(L/min).
Zero pressure gas flow.
Require gas flow of plasma 4500L/H.
Characteristics of gas flow.
Gas flow is a function of inlet pressure and temperature.
People also translate
Of the high velocity gas flow.
The gas flow temperature is considerably lower than R-22.
Of the high velocity gas flow.
A gas flow then develops from the companion star to the primary.
Yellow handles for gas flow regulation.
The gas flow temperature and pressures are similar to those seen with R-12.
We can't let them restart the gas flow.
The device diaphragm gas flow meter, used to equip municipal pipelines.
Membrane-type meters are used for maximum gas flow rates Qmax.
Gas flow control and regulation unit of generated endogas, natural gas and nitrogen.
Industrial gas meters are produced taking into account the direction of the gas flow.
It is important that in this mode of operation the gas flow will be equal to at least 300 l/ h.
Normally the gas flow in the scrubber is counter to the liquid flow. .
A manifold system is needed to change the direction of the gas flow to clean the bed.
The gas flow temperature is slightly lower than that with R-12. Compatible lubricants.
Active, closed gas control loop by permanent measurement of the gas flow.
The turbine housings direct the gas flow through the turbine as it spins at up to 250,000 rpm.
A facility this size, A half hour to get back online,Run tests, restart the gas flow.
Install wellhead control oil and gas flow to facilitate drilling or production of oil and gas. .
On this basis, the meter model for an apartment should be selected with the right andleft directions of the gas flow.
When he opened the valve- to let the TFE gas flow under its own pressure from the cylinder- nothing happened.
Instead of matter and antimatter particles, the researchers used pairs of phonons, orquantum sound waves, in the gas flow.
Proportional valve control gas flow, steady flow, good cutting surface quality.
My job is to inspect the safety of this plant,Which means evaluating your security protocols Before you restart gas flow.
When he opened the valve- to let the TFE gas flow under its own pressure from the cylinder- nothing happened… We were in a quandary.