Examples of using Gas flow in English and their translations into Romanian
{-}
-
Colloquial
-
Medicine
-
Official
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
Feed Gas Flow(L/min).
Of the high velocity gas flow.
Discharge gas flow: 650 Nm³/h.
We got to release and divert the gas flow.
Yellow handles for gas flow regulation.
People also translate
Flue gas flow by nominal output- pellets.
In 1912 after a seismic impulse the gas flow stopped.
Temperature, gas flow, acoustic drive steadied.
It shall be in an area where gas flow is regular.
The gas flow temperature is slightly lower than that with R-12.
In board filtering:To avoid SOx gas flow effect.
The gas flow temperature is considerably lower than R-22.
(f) maximum contact surface between the gas flow and the absorbing material;
Ideal for gas flow calibration(custody transfer) applications.
The only parameters that you have to define are the oven temperature and the gas flow.
The gas flow temperature and pressures are similar to those seen with R-12.
The fan is the power unit for gas flow in the purification system.
Gas flow adjustment: 20… 100% with according decrease of electric energy consumption;
A pressure of 1.4 to 1.7 bars(measured by gas flow) should be used for spraying.
It ensures that the gas flow to our pipeline is enough to be able to supply everything Moldova needs.
Distributor of equipment and supplies for vacuum andthin film, gas flow, and cryogenic applications.
So the wire outside(infiltration) gas flow for the enrichment of oxygen, the pressure of one atmosphere, was discharged into the atmosphere.
Fitted with automatic solenoid valve for removing the gas flow from the bottle in case of alarm.
High speed exhaust gas flow, and even the high speed airflow mixed with water mist will not cause the exhaust port to be….
Infrastructure and equipment to permit west-east gas flow in the event of short term supply disruption.
Sponsored Links: SCADACore Flow Calc provides users with a simple to use AGA 3 andAGA 8 gas flow calculator.
Thus, when a power outage occurs and gas flow blockage, as a consequence, the burner is extinguished.
Gas flow through the counting device can flow left-to-right or right-to-left, this aspect must always be taken into account before purchasing.
Proportional valve control gas flow, steady flow, good cutting surface quality.
High speed exhaust gas flow, and even the high speed airflow mixed with water mist will not cause the exhaust port to be closed in advance.