Examples of using Backrest in English and their translations into Chinese
{-}
-
Political
-
Ecclesiastic
-
Programming
Backrest Tester.
Cushion Heating System/ Backrest Heating System.
No backrest: easy to sit, easy to clean for the elderly.
Cushion Ventilation System/ Backrest Ventilation System.
In 1968,Brose starts producing seat recliners for adjusting backrests.
Two try back angle: the backrest of a computer chair needs tilting function.
The specific method is to press the armrest and the backrest of the sofa by hand.
Looking at the backrest, the backrest of the office chair emphasizes comfort and safety.
The chair shot out from the table and its backrest hit the detective in the crotch.
At first I thought that the mostchallenging part of the design would be the backrest.
Some of the backrests of the chair are loose, and even a slight shaking can produce noise.
A good office chair should befree to adjust for maximum comfort by adjusting the backrest, chair surface and armrests.
On the contrary, the higher the backrest, the support surface is large, will affect the physical activity.
A good office chair should be freelyadjustable to achieve maximum comfort by adjusting the backrest, seat and armrests.
Should you want to carry longer items, the backrest of the front passenger seat can be folded as well.
The backrest of the chair is best fitted to the child's spine physiological curve, with a little back up at the top.
Merc says the new seats are capable ofmaking minor adjustments to the seat cushion and backrest every minute to avoid fatigue.
The backrest of the chair is best fitted to the child's spine physiological curve, with a little back up at the top.
A good chairshould be freely adjusted by adjusting the backrest, the chair surface and handrails to achieve maximum comfort.
The base module(pouf), without backrest, can be used as a pouf or extension to make a lounge chair(associated with an angle).
Often they made Mr. Xie sit on top of the“dangling chair”:several plastic stools without backrests that were stacked on top of each other.
Typically, the upper edge of the backrest should be about 10 cm below the armpit, approximately at the width of the finger.
It consists of 6 basic elements(2 seat units, 1 armrest,and 3 backrests) that can be freely arranged to create multiple seating systems and endless custom designs.
The system is installed behind the backrest of the rear seats and is hidden by the rear backrest trim so it is normally not visible.
When a rear-end collision occurs, the backrest follows the passenger's rearward movement to reduce the forces on the neck and spine.
Counting from the ground, sofa bed backrest height should be maintained at 68-72 cm, in this range, the body's comfort is the strongest.