What is the translation of " LOAD FACTOR " in Chinese?

• 加载因子
• 负载系数
• 负载因子

Examples of using Load factor in English and their translations into Chinese

What is plant load factor?
什么是负载系数(loadfactor)？?

The default load factor of 0.75 is a balanced selection of space and time efficiency.
默认的的负载因子0.75是对空间和时间效率的一个平衡选择。

By default the value of the initial capacity is 16, and the load factor is 0.75.
默认初始容量是16，加载因子是0.75。

The initial capacity and load factor parameters are merely hints to the implementation.
初始容量和加载因子这两个参数只是对该实现的提示。

HashMap(): Build a HashMap with an initial capacity of 16 and a load factor of 0.75.
HashMap()：构建一个初始容量为16，负载因子为0.75的HashMap。

This is the highest April load factor in Turkish Airlines' history with 83.2%.
这一乘客增加使土耳其航空历史上最高的4月载客率成为83.2％的载客率.

Load factor is the percentage of seats filled by fee-paying passengers over a certain period.
负载系数是指付费乘客在一定时期内填补的座位百分比。

HashMap(): Build a HashMap with an initial capacity of 16 and a load factor of 0.75.
HashMap()：构造一个具有默认初始容量(16)和默认加载因子(0.75)的空HashMap。

The default load factor of 0.75 is a balanced selection of space and time efficiency.
需要注意的是，默认的负载因子0.75是对空间和时间效率的一个平衡选择。

An instance of HashMap has two parameters that affect its performance: initial capacity and load factor.
Hashtable的实例有两个参数影响其性能：初始容量和加载因子。

Generally, the default load factor( .75) offers a good tradeoff between time and space costs.
通常，默认负载因子（0.75）在时间与空间成本之间提供了良好的权衡。

An instance of Hashtable has two parameters that affect its efficiency: its capacity and its load factor.
Hashtable的实例有两个参数影响其性能：初始容量和加载因子。

Low passenger/cargo load factor of aircraft tasked by the Transport and Movement Integrated Control Centre.
运输和调度综合控制中心指派的飞机客运/货运载荷因数低.

An instance of HashMap has two parameters that affect its performance: initial capacity and load factor.
HashMap详解：HashMap有两个参数影响其性能：初始容量和加载因子。

As a general rule, the default load factor( .75) offers a good tradeoff between time and space costs.
作为一般规则，默认负载因子（0.75）在时间和空间成本上提供了良好的权衡。

Taiwan is also introducing a tiered production cap: 100% of FiT for production up to 4,200 annual full-load hours(48% load factor);
台湾也推出了分层生产上限：100%的FiT用于生产，每年满负荷小时达到4,200小时(48%负载系数);

The load factor is a measure of how full the hash map is allowed to get before its capacity is automatically increased.
加载因子是哈希表在其容量自动增加之前可以达到多满的一种尺度。

Unit design life of 40 years, the annual average load factor of not less than 80%, the annual generating capacity of 14 billion kwh.
机组设计寿命40年，年平均负荷因子不低于80％，年发电量140亿KWh。

As the load factor increases towards 100%, the number of probes that may be required to find or insert a given key rises dramatically.
随着载荷系数增加到100％，可能需要查找或插入给定关键字的探针数量急剧增加。

Our diesel generator sets cover a complete power range, featuring an industry-leading average load factor, reliability and availability.
我们的柴油发电机组涵盖了全部功率范围，具有行业领先的平均负载系数、可靠性和利用率。

WestJet's load factor, a measure of how full its aircraft were, increased to 84.8 per cent compared with 83 per cent a year ago.
数据显示，WestJet的载荷系数（衡量其飞机的完整程度）上升到84.8％，而一年前为83％。

Our diesel standby generator sets cover a complete power range with an industry-leading average load factor, reliability and availability.
我们的柴油发电机组涵盖了全部功率范围，具有行业领先的平均负载系数、可靠性和利用率。

While International Load Factor increased by 6 points up to 81%, Domestic Load Factor went up by approximately 4 points to 86%.
国际负荷系数增加6个百分点至81％，而国内负荷系数则上升约4个百分点至86％.

There will be a tiered production cap with 100% of the feed-in-tariff for production up to 4,200 annual full-load hours(48% load factor);
台湾也推出了分层生产上限：100%的FiT用于生产，每年满负荷小时达到4,200小时(48%负载系数);

The HashMap is created with default load factor(0.75) and an initial capacity sufficient to contain the elements in the specified collection.
使用默认的加载因子0.75和足以包含指定collection中所有元素的初始容量来创建HashMap。

Mobility management has the highest potential for the reduction of CO2 emissions; therefore, focus should be on trip avoidance, a modal shift to less impacting modes and increasing the load factor.
流动性管理最具二氧化碳减排潜力。因此，应该把重点放在避免出行、转向影响较小模式以及增加承载系数方面。

The sensor uses a new real-time measurement method Heart Load Factor, so that S9 series can always track the user's heart load situation.
该传感器利用全新的实时测量方法HeartLoadFactor，让S9/S9+能时刻跟踪用户的心脏负荷情况。

A common choice would be to double the table size when the load factor would exceed 1/2, causing the load factor to stay between 1/4 and 1/2.
一个常见的选择是表规模扩大一倍，当负载系数将超过1/2，导致负载系数保持在1/4和1/2之间。