What is the translation of " READ-WRITE " in Chinese?

• 读写
• 可读写

Examples of using Read-write in English and their translations into Chinese

RAM is also called Read-Write Memory.
RAM也称为读写存储器。

R is a read-write accessor property with getter and setter.
R是可读写的存取器属性，同时有getter和setter.

Unlike instance methods, subscripts can be read-write or read-only.
不同于实例方法的是，下标可以是可读写的或者只读的。

Supporting general, read-write shared variables across tasks would be inefficient.
对跨任务的通用的读写共享变量的支持是效率低下的。

These snapshots can then be used to create new volumes for read-write use.
然后可以使用这些快照来创建新的卷，以供读写使用。

To add read-write support for NTFS volumes, you can install NTFS-3G separately.
要为NTFS卷添加读写支持，您可以单独安装NTFS-3G。

Since then, we have seen a wave of open data, but not of read-write data.
从那时起，我们看到一大波开放数据，而不是读写数据。

The List class declares a single read-write indexer that takes an int parameter.
该List类声明了单个读写索引器，该索引器接受一个int参数。

Opposite the actuator at the end of the head support arm is the read-write head;
与头部支撑臂末端的致动器相对的是读写头;

With Solid, it becomes a read-write web where users can interact and innovate, collaborate and share.
通过Solid，它就变成可读写网络，用户可以在其中进行交互、创新、协作和共享。

We could describe it using modern computer terminology as a kind of read-write culture.
我们可以用现代电脑术语来形容它称其为一种“读写文化”。

Depending on the environmental conditions, read-write ranges of up to 1 m(HF) or several meters(UHF) are possible.
根据环境条件，读写范围可达1米（HF）或几米（UHF）。

These two advantages enable SSDS with NVMe protocol faster 4K data read-write performance.
这两个优势使得采用NVMe协议的固态硬盘拥有更快的4K数据读写性能。

A read-write device, reads these symbols or blanks and gives the machine instructions to perform a certain program.
读写设备读取这些符号和空白，从而为机器提供执行某个程序的指令。

The only one of the XML Usual Suspects that supports read-write access is the XmlDocument.
唯一一个支持读写访问的“XML常见疑点”是XmlDocument。

When the read-write operation is completed, the two sides no longer need the connection, they can release the connection.
当读写操作完成后，双方不再需要这个连接时它们可以释放这个连接，.

The biggest problem, of course, is that the read-only and read-write community strings are sent as clear-text strings;
最大的问题,当然,是只读和读写社区字符串作为以明文发送字符串;

Each non-static public read-write field and property for an attribute class defines a named parameter for the attribute class.
属性类的每个非静态公共读写字段和属性为该属性类定义一个命名参数。

This I/O bottleneck has arisen because processor speed and efficiency are increasing faster than storage read-write rates.
这种输入/输出(I/O)瓶颈的发生，是因为处理器速度和效率的增长要快于存储读写速度。

MAX-ACCESS are read-only, read-write, read-create, notaccessible, and accessible-for-notify.
MAX-ACCESS的有效的选项是只读的,读写,read-create,无法访问,和accessible-for-notify。

Spectre 1.2 allows an attacker to overwrite read-only data and code pointers to breach sandboxes on CPUs that don't enforce read-write protections.
Spectre1.2允许攻击者覆盖制度数据和代码指针，从而破坏不强制执行读写保护的CPU上的沙箱。

Sadly, the critical HDD failure is a common reason why all read-write system actions are either slow or completely blocked.
遗憾的是，关键的HDD故障是所有读写系统操作缓慢或完全阻塞的常见原因。

Taken together, our results demonstrate that DNCs have the capacity to solve complex, structured tasks that are inaccessible to neural networks without external read-write memory.
总而言之，我们的结果表明DNC有能力解决对没有外部读写记忆的神经网络而言难以解决的复杂的结构化任务。

Similar to properties, indexers can be read-write, read-only, and write-only, and the accessor(s) of an indexer can be virtual.
与属性类似，索引器可以是读写、只读和只写的，并且索引器的访问器可以是虚的。

Linux 3.13 includes a new technology called Multi-Queue Block Layer, which improves read-write performance on SSD disks by spreading the work across multiple cores.
Linux3.13包括一个称为多队列块层的新技术，通过将作业分发到多核提高了SSD磁盘读写性能。

The core of the RF circuit is the read-write chip MFRC500, which is the bridge for data transmission between the microcontroller and the IC card.
射频电路的核心是读写芯片MFRC500，它是单片机与IC卡之间数据传输的桥梁。

Ultra-high-speed bandwidth- bandwidth over 9GB/s in read, write, and read-write hybrid modes, significant faster than current competing NAND.
超高速带宽，在读、写和读写混合模式下带宽超过9GB/s，显著快于目前的竞品NAND。

Among them, the operation of the read-write module by the one-chip computer is to realize the operation of the Mifare1 card by controlling the MFRC500.
其中单片机对读写模块的操作就是通过控制MFRC500来实现对Mifare1卡的操作。

These applications almost always need shared, read-write access to large amounts of sensitive data that is best stored, processed, and secured in the cloud.
这些应用程序几乎始终需要针对在云中进行最佳存储、处理和保护的大量敏感数据的共享读写访问权限。