Examples of using Elastic modulus in English and their translations into Croatian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Small thermal conductivity,low elastic modulus.
High elastic modulus, high elongation at break;
Evanohm foil could be self elastic modulus compensation;
Low elastic modulus, small thermal conductivity, no ferromagnetism.
Evanohm foil could be self elastic modulus compensation;
The elastic modulus of titanium alloy is low, which is about 1/2 of steel.
Compared with steel,titanium has low elastic modulus and small density.
Hardness and elastic modulus as a function of penetration depth.
(7) Selection of self-compensating coefficient of temperature and elastic modulus.
All kinds of metal elastic modulus and yield strength range.
For many, the parameters of the sound absorption index and the elastic modulus remain an empty sound.
At room temperature, the elastic modulus of titanium is 106.4GPa, which is 57% of that of steel.
Tensile strenght is between values of grey cast iron and nodular graphite cast iron.It has high elastic modulus.
At room temperature, the elastic modulus of titanium is 106.4GPa, which is 57% of that of steel.
An instrumented indentation measurement enables you to determine a material's mechanical properties,like its hardness, elastic modulus or creep.
The tensile strength reached above 1150 MPa, the elastic modulus decreased below 130 GPa, and the elongation reached 10% or more.
An instrumented indentation measurement enables you to determine a material's mechanical properties,like its hardness, elastic modulus or creep.
Low density, high elastic modulus, used in the production of 450 degrees below the work of the compressor disk, blades, etc.
The Microindentation Tester is ideally suited to the measurement of mechanical properties such as hardness and elastic modulus based on instrumented indentation testing IIT.
Its characteristic is that the elastic modulus is closer to natural bone than other metal materials, the density is small, and the quality is light.
It achieves a good combination of strength and plasticity which is not available in the prior art materials and has the advantages of a lightweight,good elastic modulus and easy production and processing.
Since the ratio of the yield limit of titanium to the elastic modulus is large, the resilience of titanium when molded is large.
The elastic modulus correction is dependent on the current creep coefficient and the current elastic modulus as obtained from the uniaxial diagram of concrete in compression.
In the metal materials used for hard tissue repair, the elastic modulus of titanium is closest to human tissue, which can reduce metal implants and bones.
The UNHT³ HTV high-temperature nanoindentation tester is a low-load nanomechanical test system for measuring the hardness and elastic modulus of thin films and coatings up to 800 °C.
Furthermore, hardness and elastic modulus can be determined at various positions(user defined matrix) in a single measurement by the instrumented indentation technique.
Active substances in medications have a direct effect on the characteristics of the bone,so bone hardness, elastic modulus of bone, and bone creep are key parameters in the development of new medication.
Depth-instrumented indentation: the penetration depth is continuously monitored as a function of the force applied in order tomeasure not only the hardness of materials but also the elastic modulus.
The density is 4.48g/cm3, the room temperature elastic modulus is 123GPa, the Poisson's ratio is 0.33, the phase transition point is 1000±20°C, and the hardness is HB331-343°C.
Compared with ceramics, stainless steel andother materials, the elastic modulus of titanium alloy is closer to human bones, and it has an advantage in modulus. .