Examples of using Elastic modulus in English and their translations into Spanish
{-}
-
Colloquial
-
Official
ES is the elastic modulus of the bolt.
Fabric calibrated with asymmetric elastic modulus.
With high elastic modulus, good mechanical strength.
The composites have a high elastic modulus.
Rated force, elastic modulus, and curve analyzed repeatedly.
CNT was found to have outstanding elastic modulus and plasticity.
Elastic modulus is also known as Young's modulus. .
Variation of dynamic elastic modulus description.
Elastic modulus is 22~ 141 dtex/cn, 2~ 3 times higher than nylon.
The fluidity and bending elastic modulus are improved.
The elastic modulus is 22~ 141cN/dtex, 2~ 3 times higher than nylon.
Tension units are elastic modulus aramid fiber.
The stress-strain ratio is a constant, K, known as the elastic modulus.
A clear transition of the elastic modulus is observed at 31-32 degrees C.
(7) Selection of self-compensating coefficient of temperature and elastic modulus.
(1) The elastic modulus of titanium is low relative to its tensile performance.
This part, using ABS plastic, has an Elastic Modulus of 2x109 N/m2.
The elastic modulus of titanium is relatively low relative to its tensile properties.
Reduce the water absorption of the material and the elastic modulus of the material; 3.
Figure 2(a) displays the elastic modulus, while Figure 2(b) displays the hardness.
For use in combination with standard P-wave transducers to measure the dynamic elastic modulus of the material under test.
Estimating the dynamic elastic modulus of samples with the shear wave transducers.
It includes both plastic and elastic behavior,so it is an apparent value of elastic modulus rather than a true value.
For a linear elastic material, the elastic modulus is the stress required to cause a unit strain in the material.
In turn, they use this information to infer changes in the properties of the rocks at the interface,such as density and elastic modulus.
No fiber steel pipe RPC,high compression, elastic modulus and impact toughness.
It displays typical characteristics of both classes of metals, including a very high melting point,high density and an extremely high elastic modulus 466 GPa.
Mg/polymer composite exhibits superior mechanical properties(strength, elastic modulus) to those of dense or porous resorbable polymers.
Ti40Cu36Pd14Zr10 is believed to be noncarcinogenic,is about three times stronger than titanium, and its elastic modulus nearly matches bones.
For further information on ultrasonic measurement of elastic modulus, consult the following: 1.
