Examples of using Bottom hinge in English and their translations into Czech
{-}
-
Colloquial
-
Official
The bottom hinge is loose.
Now it is necessary to remove the bottom hinge.
I built the bottom hinge from a washing machine lid.
Insert the screw pin(9) into the bottom hinge 2.
Unscrew the bottom hinge and the two levelling feet.
Place the bottom door on the bottom hinge.
Insert the bottom hinge pin into the bottom hinge. .
Unscrew and remove the bottom hinge pin, and.
Screw the bottom hinge and the levelling feet back to their new positions.
Seat the door in location andensure that it is seated on the bottom hinge 2.
Bottom hinge bracket and left foot bracket by unscrewing the bolts.
Remove two screws(8),fastening the bottom hinge(2) and remove the bottom hinge 2.
Rotate the door 180, fi rst secure it in the top hinge andthen lift slightly and secure it in the bottom hinge.
Tilt the appliance and remove the two screws(7)holding the bottom hinge(8) and the corresponding foot(9) F.
Before attaching the bottom hinge(2)remove the screw pin(9) and turn the bottom hinge(2) around.
Fit the bottom hinge(8) and the top hinge(5) on the opposite side, repeating the steps from point A to point D in reverse order 1. /2.
Door is level;insert the bottom hinge pin into the lower hole of the door and the top hinge pin into upper hole of the door.
Bottom left hinge keeps coming loose.
Check that the bottom door hinge is correctly located.
Attach the bottom door hinge on the other side.
Place the door on to the bottom door hinge.
Remove the bottom door hinge and install it on the opposite side.
Install the lock at approx. 850mm from the ground,just above the side hinge of the bottom section.
If you look closely,the depression fracture to the skull has a slightly smaller hinge on the bottom than the top.