Examples of using Manometer in English and their translations into Czech
{-}
-
Colloquial
-
Official
A manometer for measuring the steam pressure.
Van Slyke gas manometers, sir, Doctor.
A manometer enables the pressure selected to be checked.
Van Slyke gas manometers, sir, Doctor.
Manometer shows 10% higher pressure than operating pressure!
Those are Van Slyke gas manometers over there.
The manometer. it's all set up, Doctor.
No water appears, though manometer shows full pressure!
This model comes with a PVC dry bag and a manometer.
Vacuum switches or manometers can be affixed to monitor the filters.
The piston pressure can be read off from the clearly visible manometer scale.
Fill the circuit with water until the manometer indicates a pressure of±2.0 bar.
The vacuum manometer allows the vacuum system to be tested for leaks and correct operation.
All the manual pumps up to 5 litres come as standard with a manometer and a 2-metre hose.
On any given day, I analyze the manometer levels for air displacement friction and velocity.
Please check the pressure with the supplied pressure gauge(please refer to the“Instructions for the manometer”) Overpressure.
Small used area manometer with separating membrane included is an advantage of this device.
Inductive sensors are also used for accurate andreliable detection in measurement devices such as manometers and flowmeters.
Filler neck and dip stick 5 mains cable 2 fast-on connector 6 manometer 3 relief valve 7 control lever, left-close- right-open 4 fast-on coupling sleeve 8 pressure adjustment valve.
The numbers shown below refer to the figures on page 60: Open stopcock(1),check pressure at manometer 11.
At full load(control damper(7) fully open)the pressure on the manometer must match the rated pressure as per nameplate.
The working pressures are set to the working pressure required using a rotary controller andcan be checked using a class 1.6 manometer.
We can also offer pressure gauges as a measuring set in a case containing a manometer, measuring tubes and measuring points for connection to the system.
Glycerine gauges are designed for more demanding conditions where vibration,humidity or other harsh effects occur on the manometer.
All venous pressuregauges have three-way cock, PVC 3.0/4.2 mm connection tube of 600 mm length and manometer branch with a scale for venous pressure reading, i.e.
The oil pressure control module consists of a controller,including connection parts such as manometer, manometer valve and a bypass valve.
If you have your backpack stuffed with equipment such as The Powerslide Air Pump with built-in manometer, a set of tyre levers and some spare parts, there is no excuse to go home early.